ONORM EN 10163-1-1992 Delivery requirements for surface condition of hot rolled steel plales wide flats and sections -General requirements《热轧钢板、宽扁钢和型钢的表面条件的交货要求 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G138-2006 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance《用标准辐射源校准分光辐射度计的标准试验方法》.pdf

ASTM G138-2012 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance《用标准发光源校准光谱辐射计的标准试验方法》.pdf

ASTM G139-2005 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method《用破坏载荷法测定可热处理铝合金制品的抗应力腐.pdf

ASTM G139-2005(2011) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method《用断裂荷载法测定可热处理的铝合金.pdf

ASTM G139-2005(2015) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method《使用破坏载荷法测定可热处理铝合金.pdf

ASTM G14-2004 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)《管道涂层抗冲击性的标准试验方法(落锤试验)》.pdf

ASTM G14-2004(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)《钢制管道涂层抗冲击性的标准试验方法(落锤试验)》.pdf

ASTM G14-2004(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)《钢制管道涂层抗冲击性的标准试验方法 (落锤试验)》.pdf

ASTM G140-2002 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method《用湿蜡法测定大气氯化物沉淀速率的标准试验方法》.pdf