ONORM EN 187-1-1992 Ceramic tiles - Extruded ceramic tlles with a water absorption of 6% E 10% (Group A IIb)《瓷砖 吸水量6% E 10%的挤压成形的瓷砖（A IIb组）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4600-1992 加工铝合金扩孔钻用槽铣刀 D=35~63mm.pdf

HB 4601-1992 加工铝合金扩孔钻槽铣刀用样板和校对样板 检测HB 4600-92槽铣刀用.pdf

HB 4602-1992 二齿普通直柄立铣刀 d=3~20mm.pdf

HB 4603-1992 三齿普通直柄立铣刀 d=3~28mm.pdf

HB 4604-1992 三齿端刃过中心普通直柄立铣刀 d=10~25mm.pdf

HB 4605-1992 双头三齿普通直柄立铣刀 d=10~25mm.pdf

HB 4606-1992 四齿普通直柄立铣刀 d=6~40mm.pdf

HB 4607-1992 六齿普通直柄立铣刀 d=16~40mm.pdf

HB 4608-1992 二齿削平型直柄立铣刀 d=6~20mm.pdf