ONORM EN 24049-1993 Dentistry - Resin-based filling matenals (ISO 4049 1988)《牙科 树脂基填充材料(ISO 4049-1988)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24117-1980 Keyway depth gauges for holes with diameter over 90 to 200 mm Design and dimensions《直径90mm～200mm的孔用键槽深度量规 结构及尺寸》.pdf

GOST 24118-1980 Keyway depth gauges for shafts with diameter from 6 to 200 mm Design and dimensions《直径 6mm～200mm的轴用键槽深度量规 结构及尺寸》.pdf

GOST 24119-1980 Keyway depth gauges for segmental key slots Design and dimensions《弧形键槽深度量规 结构及尺寸》.pdf

GOST 24120-1980 Keyway gauges for dimensions from 1 to 3 mm Design and dimensions《尺寸 1mm～3mm的键槽量规 结构及尺寸》.pdf

GOST 24121-1980 Keyway gauges for dimensions over 3 to 50 mm Design and dimensions《直径3mm～50mm的键槽量规 结构及尺寸》.pdf

GOST 24126-1980 Power transformer on-load tap-changing devices General specifications《负载下的变压器绕组的抽头的转换装置 一般技术条件》.pdf

GOST 24127-1980 Continuous operation gas-discharge lamps Terms and definitions《连续动作的气体放电管 术语和定义》.pdf

GOST 24132-1980 Pipe-line fastening parts Cramps Design and dimensions《卡环 结构及尺寸》.pdf

GOST 24133-1980 Pipe-line fastening parts Single-seat cramps Design and dimensions《单位卡环 结构及尺寸》.pdf