ONORM EN 24920-1993 Textile fabrics - Determination of resistance to surface wetting (Spray test)《纺织面料 表面耐水湿性能的测定 (喷雾试验法)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 2255-1971 High speed steel inserted blade shell type counterbores Design and dimensions《镶高速钢刀片套式扩孔钻 结构及尺寸》.pdf

GOST 2259-2006 Unwashed classed goat hair Specifications《经过分级未洗净的山羊毛 技术条件》.pdf

GOST 2260-2006 Unwashed classed goat down Specifications《未洗过的分级山羊绒 技术条件》.pdf

GOST 2264-1975 Technical coal tricresol Specifications《工业煤三甲酚 技术条件》.pdf

GOST 2270-1978 Abrasive tool Main dimensions of fixing elements《研磨工具 紧固件的基本尺寸》.pdf

GOST 228-1979 Stud-link anchor chains General specifications《螺柱连接的锚链 通用规范》.pdf

GOST 2283-1979 Cold-rolled tool and spring steel strip Specifications《冷压工具和弹簧钢带 规范》.pdf

GOST 2284-1979 Cold-rolled carbon structural steel strip Specifications《碳素结构钢冷轧钢带 规范》.pdf

GOST 2287-1988 Flat thread chasers Specifications《平面螺纹梳刀 技术条件》.pdf