ONORM EN 28676-1992 Hexagon head screws with metric fine pitch thread -Product grades A and B《细牙全螺纹的六角头螺栓 产品等级A和B》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D739-A-2006 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《刚性、受热稳定的聚酰胺12模塑和挤塑成型料 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSK-M4D739-A2-2006 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《刚性、受热稳定的聚酰胺12成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D739-A3-2006 POLYAMIDE 12 (PA12) RIGID HEAT STABILIZED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用聚酰胺12（PA12）刚性、受热稳定的成型料 与标准FORD WSS-M99P1111.pdf

FORD WSK-M4D739-A4-2006 POLYAMIDE 12 (PA12) RIGID HIGH HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酰胺12（PA12）刚性、受热稳定的成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D740-A-2011 ABS PVC BLEND VACUUM FORMABLE SHEET TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈 聚氯乙烯混合可形成真空的板 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D741-A1-2006 POLYPROPYLENE (PP) COPOLYMER COOLING AGENT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D969-A)《聚丙烯(PP)共聚物耐冷却剂(和FORD WSS-M99P1111-A一起使用)使用WSS-.pdf

FORD WSK-M4D741-A2-2012 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《抗冷却剂的聚丙烯(PP)均聚物 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D741-B1]》.pdf

FORD WSK-M4D741-A3-2006 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D741-A2)《耐冷却液的聚丙烯（PP）均聚物 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D742-A-2006 POLYAMIDE (PA) 6 EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酰胺6挤塑成型料 与标准FORD WSS-M99P1111-A一起使用 [替代 FORD ESA-M4D331-A FORD ESA-M4D3.pdf