ONORM EN 3306-1996 Aerospace series-Screws 100 degree conutersunk normal head offset cruciform recess threaded to head in titanium alloy anodized MoS2 lubricated-Classification 110.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2879-2018 Standard Specification for Eye Protective Devices for Airsoft Sports《空软运动用护眼装置标准规范》.pdf

ASTM F2880-2011a Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes &x00BE in to 65 in 《公称通径管道尺寸为 x00BE 65 in 的聚乙烯压力管用搭接.pdf

ASTM F2880-2014 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3 4 in to 65 in 《公称管道尺寸为3 4英寸至65英寸的聚乙烯压力管用搭接型法兰适配器的标准.pdf

ASTM F2881 F2881M-2018 Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications.pdf

ASTM F2881-2011 Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications《无压雨水管用12至60 in [300.pdf

ASTM F2881-2011(2015) Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications《无压暴雨排水管设施用12至.pdf

ASTM F2882 F2882M-2017 Standard Specification for Screws Alloy Steel Heat Treated 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)《最小拉伸强度170 ksi和1170 MPa(英制和公制)的热处理合.pdf

ASTM F2882-2012 Standard Specification for Screws Alloy Steel Heat Treated 170 ksi Minimum Tensile Strength《最小抗拉强度为170 ksi的热处理合金钢螺丝的标准规范》.pdf

ASTM F2883-2011 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Ap.pdf