ONORM EN 76-1979 Packages for certain pre-packed foodstuffs Capacities of glass and metal Containers 《某些预包装食品的包装 玻璃和金属容器的容量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7474-2008 346 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents《通过浸入各种化学试剂中测定挤压或模.pdf

ASTM D7474-2012 3125 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents《通过浸入各种化学试剂中测定挤压或.pdf

ASTM D7474-2017 red 7500 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents《通过浸入各种化学试剂中测.pdf

ASTM D7475-2011 5000 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions.pdf

ASTM D7476-2008 809 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins《盐保存(腌制)兽皮卤水饱和度的试验方法》.pdf

ASTM D7476-2008(2013) 2500 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins《腌制 (盐腌) 皮革和兽皮盐饱和值的标准试验方法》.pdf

ASTM D7477-2008 895 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water《测定淹没在沸水中蓝湿皮的区域稳定性的标准试验方法》.pdf

ASTM D7477-2008(2013) 4375 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water《测定淹没在沸水中的湿蓝区域稳定性的标准试验方法》.pdf

ASTM D7477-2016 1281 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water《测定湿铬鞣革浸入沸水中的面积稳定性的标准试验方法》.pdf