ONORM H 6015-1 AC-1998 Ventilation and air conditioning plants - Circular spirally and wound sheet ducts and fittings - Dimensions requirements measurement (Corrigendum)《通风设备和空调设备 .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 992-1995 en Determination of the Dry Density of Lightweight Aggregate Concrete with Open Structure《多孔结构轻质集料混凝土干密度的测定》.pdf

EN 993-1-1995 en Methods of Test for Dense Shaped Refractory Products - Part 1 Determination of Bulk Density Apparent Porosity and True Porosity《密封成型耐火制品检验方法 第1部分 粗密度 开口孔隙度和整体孔隙度的测.pdf

EN 993-10-1997 en Methods of Test for Dense Shaped Refractory Products - Part 10 Determination of Permanent Change in Dimensions on Heating《密封成型耐火制品检验方法 第10部分 温度影响后恒定长度变化的测定》.pdf

EN 993-11-2007 en Methods of test for dense shaped refractory products - Part 11 Determination of resistance to thermal shock《密封成型耐火制品检验方法 第11部分 耐热冲击能力的测定》.pdf

EN 993-12-1997 en Methods of Test for Dense Shaped Refractory Products - Part 12 Determination of Pyrometric Cone Equivalent (Refactoriness)《密封成型耐火制品检验方法 第12部分 熔锥比值(耐火性)测定》.pdf

EN 993-13-1995 en Methods of Test for Dense Shaped Refractory Products - Part 13 Specification for Pyrometric Reference Cones for Laboratory Use《密封成型耐火制品检验方法 第13部分 对试验室用参考测温锥的规定》.pdf

EN 993-15-2005 en Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method《致密成型耐火制品的试验方法 第15部分 用热线(平行)测量法测定导热性.pdf

EN 993-16-1995 en Dense Shaped Refractory Products - Methods of Test - Part 16 Determination of Resistance to Sulfuric Acid《密封成型耐火制品的检验方法 第16部分 耐硫酸腐蚀性的测定》.pdf

EN 993-17-1998 en Methods of Test for Dense Shaped Refractory Products - Part 17 Determination of Bulk Density of Granular Materials by the Mercury Method with Vacuum《密封成型耐火制品检验方法 .pdf