ONORM ISO 7368-1990 Hydraulic fluid power two-port slip-in cartridge valves cavities《液压动力 二油口内装式阀 腔室》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 11819-2-2017 Acoustics Measurement of the influence of road surfaces on traffic noise The close-proximity method《声学 路面对交通噪声的影响测量 近距离法》.pdf

BS EN ISO 11820-1997 Acoustics - Measurements on silencers in situ《声学 声器的现场测量》.pdf

BS EN ISO 11821-1997 Acoustics - Measurement of the in situ sound attenuation of a removable screen《声学 可移动声屏障声衰减的现场测量》.pdf

BS EN ISO 11833-1-2012 Plastics Unplasticized poly(vinyl chloride) sheets Types dimensi ons and characteristics Sheets of thickness not less than 1 mm《塑料 未增塑聚氯乙烯薄板 类型 尺寸和特征 厚度不小于1 .pdf

BS EN ISO 11833-2-1998 Plastics Unplasticized poly(vinyl chloride) sheets Types dimensions and characteristics Sheets of thickness less than 1 mm《塑料 未增塑聚氯乙烯薄板 类型 尺寸规格和特征 厚度低于1 mm的薄.pdf

BS EN ISO 11844-1-2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Determination and estimation of indoor corrosivity《金属和合金的腐蚀 室内环境低腐.pdf

BS EN ISO 11844-2-2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Determination of corrosion attack in indoor atmospheres《金属和合金的腐蚀 室.pdf

BS EN ISO 11844-3-2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Measurement of environmental parameters affecting indoor corrosivi.pdf

BS EN ISO 11846-1996 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys《金属和合金的腐蚀 溶解热处理铝合金抗粒间腐蚀的测定》.pdf