ONORM M 1506-1967 《米制 ISO－螺纹 额定坡度尺寸为 0 5 mm 的细牙螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB 3198-1996 工业用纯铝箔.pdf

GB 3223-1982 水声换能器自由场校准方法.pdf

GB 3225-1982 液压挖掘机铲斗容量标定.pdf

GB 3226-1982 机械挖掘机铲斗容量标定.pdf

GB 3230-1997 职业性苯中毒的诊断.pdf

GB 3231-1996 职业性慢性三硝基甲苯中毒诊断标准及处理原则.pdf

GB 3232-1982 职业性慢性锰中毒诊断标准及处理原则.pdf

GB 3233-1982 职业性慢性二硫化碳中毒诊断标准及处理原则.pdf

GB 3234-1982 工业性氟病诊断标准及处理原则.pdf