ONORM M 3042-2-2002 Qualification and certification of NDT personnel - Part 2 Sectors and authorization of NDT personnel《无损检测人员的资格和认证 第2部分：无损检测人员的部门和授权》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 790-2001 Inland navigation vessels - Stairs with inclination angles of 45 to 60 Requirements types《内河运输船 45至60倾斜角楼梯 要求与类型》.pdf

BS EN 795-2012 Personal fall protection equipment Anchor devices《防止从高处跌落设备 锚固装置》.pdf

BS EN 797-1996 Bar coding Symbology specifications EAN UPC《条形码 符号使用规范 EAN UPC》.pdf

BS EN 80-2001 Wall-hung urinals - Connecting dimensions《墙挂式便器 连接尺寸》.pdf

BS EN 802-1995 Plastics piping and ducting systems Injection-moulded thermoplastics fittings for pressure piping systems Test method for maximum deformation by crushing《塑料管和管道系统 压力.pdf

BS EN 803-1995 Plastics piping systems Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping Test method for resistance to a short-term.pdf

BS EN 804-1995 Plastics piping systems Injection-moulded socket fittings for solvent-cemented joints for pressure piping Test method for resistance to a short-term internal hydrost.pdf

BS EN 805-2000 Water supply - Requirements for systems and components outside buildings《供水 建筑物外部的系统和构件的要求》.pdf

BS EN 806-1-2000 Specifications for installations inside buildings conveying water for human consumption - General《建筑物内部饮用水供应设备规范 总则》.pdf