ONORM M 3230-1986 Steel bars hol rolledflats dimensions masses permissible deviations《钢筋 热轧平板尺寸，质量和容许偏差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 13717-1984 Indicating manometric-action instruments with electric contacts General specifications《带有电触点压力指示仪表 通用规范》.pdf

GOST 13718-1968 Forque (torsional) balances Methods and means of verification《扭矩平衡 验收方法和装置》.pdf

GOST 13726-1997 Aluminium and aluminium alloys strips Specifications《铝和铝合金带材 技术条件》.pdf

GOST 13727-1968 (Cetraria islandica) Lichen icelend《冰岛苔》.pdf

GOST 13733-1977 Cylindrical small module straight and helical gears Types Basic parameters and dimension《小模数直齿和斜齿圆柱齿轮型式、基本参数及尺寸》.pdf

GOST 13737-1990 Extruded rectangular equishelf angle-section shapes of aluminium and magnesium alloys Dimensions《压制铝及镁合金等边角材 品种》.pdf

GOST 13738-1991 Extruded rectangular unequishelf angle-section shapes of aluminium and magnesium alloys Dimensions《铝和镁压制非支架类矩形角断面型钢 尺寸规格》.pdf

GOST 13739-1978 Immersion oil for microscopy Technical requirements Methods of testing《显微术浸镜用油 技术要求 测试方法》.pdf

GOST 13744-1987 Fluoroplast-3 Specifications《氟塑料-3 规范》.pdf