ONORM M 6603-1-1997 Water analysis - Determination of potassium and sodium by atomic absorption spectrometry《水质分析 原子吸收光谱法测定钾，钠》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 7388-3-2015 Tool shanks with 7 24 taper for automatic tool changers - Part 3 Retention knobs for shanks of forms AC AD AF UC UD UF JD and JF (ISO 7388-3 2013)《锥度为7 24的自动工具更.pdf

DIN ISO 7401-1989 Road vehicles lateral transient response test methods identical with ISO 7401 1988《道路车辆 横向瞬时响应试验方法》.pdf

DIN ISO 7425-1-1990 Hydraulic fluid power housings for elastomer-energized plastic-faced seals dimensions and tolerances piston seal housings identical with ISO 7425-1 1988《液压传动 弹性.pdf

DIN ISO 7425-2-1990 Hydraulic fluid power housings for elastomer-energized plastic-faced seals dimensions and tolerances rod seal housings identical with ISO 7425-2 1989《液压传动 弹性体赋能.pdf

DIN ISO 7437-1992 Construction drawings general rules for execution of production drawings for prefabricated structural components identical with ISO 7437 1990《建筑图样 预制结构件生产图样一般规则》.pdf

DIN ISO 7478-1989 Data communication multilink procedures identical with ISO 7478 1987 (status as of 1989)《数据通信 多链路程序》.pdf

DIN ISO 7506-1996 Textile machinery and accessories - Numbering of harnesses for drawing-in on Jacquard machines (ISO 7506 edition 1984 (stage 1992))《纺织机械和辅助装置 提花机穿经用通丝编号 (ISO 7506.pdf

DIN ISO 7518-1986 Technical drawings construction drawings simplified representation of demolition and rebuilding identical with ISO 7518 edition 1983《技术图纸 结构图 拆除和重建的简化表示法 与 ISO 75.pdf

DIN ISO 7519-1992 Technical drawings construction drawings general principles of presentation for general arrangement and assembly drawings identical with ISO 7519 1991《技术图纸 施工用图纸 .pdf