ONORM M 7506 Beib 1-1979 《根据 NORM M 7506对室内暖气片热功率测定的检验报告 A》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM EN 28339-1991 Building construction - Jointing products -Determination of tensile properties (ISO 8339 1984)《建筑施工 对接产品 拉伸性能的测定(ISO 8339-1984)》.pdf

ONORM EN 28340-1991 Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension (ISO 8340 1984)《建筑施工 对接产品 密封剂 在持续性延伸时对拉伸性能的测定.pdf

ONORM EN 28343-1992 Ferronickel - Determination of Silicon content -Gravimetrie method《镍铁 硅含量测定 重量法》.pdf

ONORM EN 28362-1-1994 Injection containers for injectables and accessories Part 1 Injection vials made of glass tubing (ISO 8362-1 1989)《注射容器及附件 第1部分：玻璃管制注射瓶(ISO 8362－1-1989)》.pdf

ONORM EN 28362-2-1994 Injection containers for injectables and accessories Part 2 Closures for injection vials (ISO 8362-2 1988)《注射容器及附件 第2部分： 注射瓶封口(ISO 8362－2-1988)》.pdf

ONORM EN 28362-3-1994 Injection containers for injectables and accessories Part 3 Aluminium caps for injection vials (ISO 8362-3 1989)《注射容器及附件 第3部分： 注射瓶的铝盖(ISO 8362－3-1989)》.pdf

ONORM EN 28362-4-1994 Injection containers for injectables and accessories Part 4 Injection vials made of moulded glass (ISO 8362-4 1989)《注射容器及附件 第4部分：由模压玻璃制成的盛注射剂的小瓶(ISO 8362－4-19.pdf

ONORM EN 28394-1991 Building construction - Jointing products - Determination of extrudability of one-component sealants (ISO 8394 1988)《建筑施工 对接产品 单组分密封剂可挤压性的测定(ISO 8394-1988)》.pdf

ONORM EN 284-1992 Swap bodies - Swap bodies of dass C - Dimensions and general requirements《互换机构 C级交换体 尺寸和一般要求》.pdf