ONORM M 9033-1-1999 Machine tools - Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and movable rectangular table《机床 带有卧式磨床轮轴和可移动矩形导轨的平面磨床的.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24802-1981 Level meters for liquid and solids Terms and definitions《测量松散物质高度和液体液面用仪器 术语和定义》.pdf

GOST 24808-1981 Brush holders and brackets for traction and electrical machines Serrate rifling Dimensions《牵引电机用电刷夹和支架 齿状沟槽 尺寸》.pdf

GOST 24811-1981 Rubber wipers for rods Types basic parameters and dimensions《活塞杆橡胶排污器 型式 基本参数和尺寸》.pdf

GOST 24814-1981 Radial roof ventilators General specifications《径向屋顶排风机 一般技术条件》.pdf

GOST 24816-2014 Building materials Method of equilibrium hygroscopic moisture determination《建筑材料 平衡吸附水分的测定方法》.pdf

GOST 24818-1981 Broaches combined for b-slitting holes with straightside profile and centring at outside deameter alternatives Design and dimensions《变切削量外直径定心的直齿六花键复合拉刀 双次 结构及尺寸》.pdf

GOST 24819-1981 Broaches combined for 6-slitting holes with straightside profile and centring at outside diameter alternatives Double driven Design and dimensions《外径定心直齿六花键孔用变切削量组合.pdf

GOST 24820-1981 Broaches combined for 8-slitting holes with straight tside proile and centring at outside diameter alternatives Design and dimensions《变切削量外径定心的直齿六花键孔复合拉刀 双次 结构及尺寸》.pdf

GOST 24821-1981 Broaches combined for 8-slitting holes with straightside profile and centring at outside diameter alternatives Double driven Design and dimensions《变切削量的外径定心直齿花键孔复合拉.pdf