ONORM M 9502-1984 Steel wire ropes rope-wire for general purposes (AV)《钢丝绳 一般用途的钢丝绳(AV)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 3286-2001 Steel bars - Forged flat steel bars - Dimensions permissible deviations《钢筋 锻造扁钢条尺寸，容许偏差》.pdf

ONORM M 3291-1980 Precision drop forgings for general use dimensions masses permissible deviations《普遍使用的精密落锤锻造尺寸，质量和容许偏差》.pdf

ONORM M 3292-1980 Precision drop forgings rotor- and Stator blades for steam- and gasturbines dimensions permissible deviations《精密落锤锻造 蒸汽和燃气轮机用的转子和定子 尺寸，容许偏差》.pdf

ONORM M 3294-1980 Steel forgings freely forged discs dimensions machining allowances and permissible deviations《钢锻件 自由锻造圆盘尺寸，加工余量和容许偏差》.pdf

ONORM M 3295-1980 Steel forgings freely forged punched discs dimensions machining allowances and permissible deviations《钢锻件 自由锻造冲压圆盘尺寸，加工余量和容许偏差》.pdf

ONORM M 3296-1980 Steel forgings seamless freely forged rings dimensions machining allowances and permissible deviations《钢锻件 无缝自由锻造环尺寸，加工余量和容许偏差》.pdf

ONORM M 3297-1980 Steel forgings seamless freely forged bushes dimensions machining allowances and permissible deviations《钢锻件 无缝自由锻造衬套尺寸，加工余量和容许偏差》.pdf

ONORM M 3315-1980 Cold rolled steel sections permissible deviations of dimensions and shapes《冷轧钢型材，尺寸和形状的容许偏差》.pdf

ONORM M 3316-1980 Cold rolled steel sections technical conditions for delivery《冷轧钢型材 交货的技术条件》.pdf