ONORM S 1392 Teil 54-1987 Rifle cartridge without brink and Chamber caliber 284 Win 《步枪子弹无边缘及药室 口径284 Win》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D969-A-2011 POLYPROPYLENE (PP) HOMOPOLYMER RESISTANT TO COOLING AGENTS TO BE USED WITH FORD WSS-M99P1111-A 《耐冷却剂的聚丙烯(PP)均聚物 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D741-B.pdf

FORD WSS-M4D971-A-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABLILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR APPLICATIONS EXTERIOR - TO BE USED WITH FORD WSS-.pdf

FORD WSS-M4D973-A-2006 POLYAMIDE (PA6 66) 6 66 COPOLYMER HEAT STABILIZED 13% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D653-A)《聚酰胺6 6.pdf

FORD WSS-M4D975-A-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER 87 A DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用硬度为87 A的热塑性弹性体制成型料安全气囊盖 .pdf

FORD WSS-M4D975-A3-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER 40 D DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用硬度为40 D的热塑性弹性体制成型料安全气囊盖.pdf

FORD WSS-M4D976-A-2003 POLYAMIDE 6 + POLYPROPYLENE BLEND (PA6 + PP) 8% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《8%玻璃纤维增强的聚酰胺6 +聚丙烯(PP)混合物(PA6+.pdf

FORD WSS-M4D977-A-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚酰胺混合物(PPE+PA)制10%玻璃纤维.pdf

FORD WSS-M4D977-A2-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4D977-A)《聚.pdf

FORD WSS-M4D979-A-2013 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND UNPAINTED AIRBAG COVER.pdf