ONORM S 1396 Teil 15-1982 Cartridge and Chamber for powder actuated tools calibre 6 8118《由起爆火药引发工具的弹药和药室 口径 6，8118》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 13-19-1999 ISO general purpose metric screw threads - Part 19 Nominal profiles《ISO一般用途米制螺纹 第19部分 标准牙形》.pdf

DIN 13-2-1999 ISO general purpose metric screw threads - Part 2 Nominal sizes for 0 2 mm 0 25 mm and 0 35 mm fine pitch threads nominal diameter from 1 mm to 50 mm《ISO一般用途米制螺纹 第2部分.pdf

DIN 13-20-2000 ISO general purpose metric screw threads - Part 20 Limits of sizes for coarse pitch threads with the prefered tolerance classes nominal sizes from 1 mm to 68 mm《ISO一.pdf

DIN 13-21-2005 ISO general purpose metric screw threads - Part 21 Limits of sizes for fine pitch threads with the preferred tolerance classes Nominal diameter from 1 mm to 24 5 mm《.pdf

DIN 13-22-2005 ISO general purpose metric screw threads - Part 22 Limits of sizes for fine pitch threads with the prefered tolerance classes Nominal diameter from 25 mm to 52 mm《IS.pdf

DIN 13-23-2005 General purpose ISO metric screw threads - Part 23 Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 53 mm to 110 mm.pdf

DIN 13-24-2005 General purpose ISO metric screw threads - Part 24 Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 m.pdf

DIN 13-25-2005 General purpose ISO metric screw threads - Part 25 Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 182 mm to 250 m.pdf

DIN 13-26-2005 ISO general purpose metric screw threads - Part 26 Limits of sizes for fine pitch threads with the prefered tolerance classes Nominal diameter from 252 mm to 1000 mm.pdf