ONORM S 4074-1990 Cross-country ski - Binding moun ting area- Requirements on fest screws - marking of conformity Skis de fand - Zone de montage de la fixation - Exigences pour des.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 17052-1-2013 Heat treatment furnaces - Part 1 Requirements for temperature uniformity《热处理炉 第1部分 温度均匀性的要求》.pdf

DIN 1707-100-2017 Soft solder alloys - Chemical composition and forms additional to DIN EN ISO 9453 2014-12《软钎料合金 化学成分和供货形式的DIN EN ISO 9453-2014-12附加》.pdf

DIN 17115-2012 Steels for welded round link chains and chain components - Technical delivery conditions《焊接圆环链和链元件用钢 技术交货条件》.pdf

DIN 17122-1978 Steel Conductor Contact Rails for Electric Traction Technical Conditions of Delivery《电气牵引用钢制导线接触轨 交货技术条件》.pdf

DIN 1715-1-1983 Thermostat metals technical delivery conditions《恒温器用金属 交货技术条件》.pdf

DIN 1715-2-1983 Thermostat metals testing the specific thermal curvature《恒温器用金属 热曲率比的检验》.pdf

DIN 1729-1-1982 Wrought magnesium alloys《锻造镁合金》.pdf

DIN 1732-3-2007 Filler metals for aluminium and aluminium alloys - Part 3 Test pieces test specimens mechanical and technological properties of all-weld metal《铝和铝合金用填充金属 第3部分 全焊金属的.pdf

DIN 17405-1979 Soft Magnetic Materials for Direct Current Relays Technical Conditions of Delivery《直流继电器的软磁体材料 交付技术状态》.pdf