ONORM S 5011-1995 Determination of noise immission caused by rail traffic - Railway traffic shunting and cargo handling Operations《铁路交通造成的噪音照射测定 铁路交通，分流和货物装卸业务》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 10220-2003 Seamless and welded steel tubes - Dimensions and masses per unit length German version EN 10220 2002《无缝和焊接钢管 单位长度尺寸重量通用表》.pdf

DIN EN 10221-1996 Surface quality classes for hot-rolled round bars and rods - Technical delivery conditions German version EN 10221 1995《热轧钢棒和线材的表面质量等级 交货技术条件》.pdf

DIN EN 10222-1-2017 Steel forgings for pressure purposes - Part 1 General requirements for open die forgings German version EN 10222-1 2017《压力用钢锻件 第1部分 开式模锻件的一般要求 德文版本EN 10222-1-20.pdf

DIN EN 10222-2-2017 Steel forgings for pressure purposes - Part 2 Ferritic and martensitic steels with specified elevated temperatures properties German version EN 10222-2 2017《压力用.pdf

DIN EN 10222-3-2017 Steel forgings for pressure purposes - Part 3 Nickel steels with specified low temperature properties German version EN 10222-3 2017《压力用钢锻件 第3部分 规定低温性能的镍钢 德文版本E.pdf

DIN EN 10222-4-2017 Steel forgings for pressure purposes - Part 4 Weldable fine grain steels with high proof strength German version EN 10222-4 2017《压力用钢锻件 第4部分 高弹限强度可焊接细晶粒钢 德文版本EN.pdf

DIN EN 10222-5-2017 Steel forgings for pressure purposes - Part 5 Martensitic austenitic and austenitic-ferritic stainless steels German version EN 10222-5 2017《压力用钢锻件 第5部分 马氏体、奥氏体.pdf

DIN EN 10223-1-2013 Steel wire and wire products for fencing and netting - Part 1 Zinc and zinc-alloy coated steel barbed wire German version EN 10223-1 2012《栅栏和网用钢丝和钢丝制品 第1部分 锌和锌合.pdf

DIN EN 10223-2-2013 Steel wire and wire products for fencing and netting - Part 2 Hexagonal steel wire netting for agricultural insulation and fencing purposes German version EN 10.pdf