ONORM V 5032 Teil 1-1990 Tyres for commercial vehicles generali marking of conformity《商用车辆轮胎 一般合格标识》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 60761-3-2004 en Equipment for continuous monitoring radioactivity in gaseous effluents Part 3 Specific requirements for radioactive noble gas monitors《气态排出物放射性连续监控设备 第3部分 惰性气体排出.pdf

EN 60761-4-2004 en Equipment for continuous monitoring radioactivity in gaseous effluents Part 4 Specific requirements for iodine monitors《气态排出物放射性连续监控设备 第4部分 碘监测仪的特殊要求 IEC 60761-4.pdf

EN 60761-5-2004 en Equipment for continuous monitoring radioactivity in gaseous effluents Part 5 Specific requirements for tritium monitors《气态排出物放射性连续监控设备 第5部分 氚监测器的特殊要求 IEC 60761-.pdf

EN 60763-1-2011 en Laminated pressboard for electrical purposes - Part 1 Definitions classification and general requirements《电气用层压板 第1部分 定义 分类和一般要求》.pdf

EN 60763-2-2007 en Specification for laminated pressboard - Part 2 Methods of test《层压板规范 第2部分 试验方法》.pdf

EN 60763-3-1-2011 en Laminated pressboard for electrical purposes - Part 3 Specifications for individual materials - Sheet 1 Requirements for laminated precompressed pressboard Typ.pdf

EN 60770-1-2011 en Transmitters for use in industrial-process control systems - Part 1 Methods for performance evaluation《工业过程控制系统用变送器 第1部分 性能评定方法》.pdf

EN 60770-2-2010 en Transmitters for use in industrial-process control systems - Part 2 Methods for inspection and routine testing《工业过程控制系统用变送器 第2部分 检验和常规试验方法》.pdf

EN 60770-3-2006 en Transmitters for use in industrial-process control systems Part 3 Methods for performance evaluation of intelligent transmitters (Remains Current)《工业过程控制系统用发射机 第.pdf