ONORM V 5061-1986 Air braking Systems for motor vehicles and trailers relay valve dimensions and requirements《汽车和挂车空气制动系统 继动阀 尺寸和要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2092-2013 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis《采用热机械分析对三点弯曲上变形温度的的标准试验》.pdf

ASTM E2092-2018 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis.pdf

ASTM E2093-2005 Standard Guide for Optimizing Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization《来自同一实验室机构中多个工作站的试验方.pdf

ASTM E2093-2012 Standard Guide for Optimizing Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization 《优化 控制和评估同一实验室组织中多工.pdf

ASTM E2093-2012(2016) Standard Guide for Optimizing Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization 《来自同一实验室机构中多个.pdf

ASTM E2096 E2096M-2010 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing《利用远场试验现场检测铁磁性热交换管的标准操作规程》.pdf

ASTM E2096 E2096M-2016 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing《利用远程现场试验现场检验铁磁换热器管的标准实施规程》.pdf

ASTM E2096-2005 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing《远程现场试验法现场检验铁磁热交换器管道的标准规程》.pdf

ASTM E2097-2000(2006) Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products《测定非金属材料萃取物对生物技术产品安全性影响的标准指南》.pdf