1、PS70092 8 September 1999 ADOPTION NOTICE PS70092, “FASTENER, PARACHUTE PACK”; was adopted on 8 September 1999 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Supply Center Richmond, ATTN: DSCR-VBD, 8000 Jefferson
2、Davis Highway, Richmond, Virginia, 23297-5610. DoD activities may obtain copies of this standard fiom the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. Private sector may purchase copies from the Parachute Industry Association, 3833 West Oakton S
3、treet, Skokie, IL 60076, or at . For cross-reference purposes, Part Numbers MS70092 and PS70092 are interchangeable. Custodians: Air Force - 99 Army - GL DLA - IS Navy - AS Reviewers: Air Force - 11, 82 Army - AV Adopting activity: DLA - GS (Project 1670-0029) AMSC N/A FSC 1670 DISTRIBUTION STATEMEN
4、T A. Approved for public release; distribution is unlimited. The following commercial specification is adopted from the military document referenced without change to the content. Note: Although many military quality and inspection specifications, drawings and standards have been discontinued or del
5、eted, most have been replaced by industry and commercial documents. When the specification refers to a discontinued or deleted document, you should refer to the procurement document or your contracting officer for guidance. The Parachute Industry Association makes this document available for use by
6、Industry and Government organizations that wish to apply this specification to their products. This document is published by the PIA to provide technical and engineering standards that can be used by reference by all those who may benefit from them. The use of this document is entirely voluntary, an
7、d its applicability and suitability for any particular use, including any patent or trademark infringement arising therefrom, is the sole responsibility of the user. The original government document was scanned. There may be errors especially in numbers. PIA disclaims any responsibility for accuracy
8、. The PIA reviews each technical publication periodically, at which time it may be reaffirmed, revised, or canceled. The PIA invites your written comments and suggestions. Notice: This document has been adopted with only typographical corrections from the original Mil-Spec, and is being maintained a
9、s a commercial specification by the Parachute Industry Association. Orders, inquiries and comments should be addressed to PIA, Specification Department, 13 15 Cheyenne Drive, Richardson, TX 75080 USA, or via e-mail: , or to our web site: http: /. Parachute Standard PS70092 Parachute Industry Assoc
10、Title 121 li172)34127 FASTENER, PARACHUTE PACK 1313 ChesnneDris RiLhardcon Ti 7si18ii LS A Fa1197217h: fy c mail hq a pia com Sheet 1 of 2 Procurement Specification I Renamed From: PIA-H-7 195 MS70092 Copyright 1998 Parachute Industry Association Inc. THIS LOCATION Procurement Specification PIA-H-7
11、195 REQUIREMENTS: EXCEPT AS SPECIFIED HEREIN, REQUIREHENTS SHALL BE IN ACCORDANCE UITH TtE PROCUREMENT SPECIFICAT ION, HIL-H-7195. Sheet 1 of 2 Renamed From: MS70092 MATERIAL TOLERANCES - COPPER ALLOY NO. C26800, HO1 PER ASTH 836 - 1.015 UNLESS OTHERYISE NOTED. DIMENSIONS ARE AFTER PLATING. SURFACE
12、ROUGHNESS FINISH - 63RHR MAX. AMERICAN NATIONAL STANDARDS INSTITUTE, INC. ANS 846 CHROMIUM PLATE, CLASS 1, TYPE 2, .O0025 HIN THK, QQ-C-320. NOTES: 1. FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN. 2. REFERENCE0 DOCUMENTS SHALL BE OF T SSUE
13、IN EFFE nN DATE OF INViTATON FOR BIOS iUPER5EDES: AN6561 (PROPOSED) RPM,tG ACTIVITY Amr-a MS70092C “1570092B 31 MARCH 1990 - N/A NIEMI m-av. Vu* I 82 mxcr ivxa, 1670-0e1v )15rRIBUTIOI( STATEMENT A. Approved Por pub s-0 4 5tributi I, IS unlimited. - In. Parachute Standard PS70092 Parachute Industry Assoc Title 121 li172)34127 FASTENER, PARACHUTE PACK 1313 ChesnneDris RiLhardcon Ti 7si18ii LS A Fa1197217h: fy c mail hq a pia com
