1、 The following commercial specification is originally adopted from the military document. Revision A includes all known accepted revisions, amendments, notices, and Department of Defense (DOD) engineering changes previously developed for this item. Revision B and forward includes changes adopted to
2、reflect technology and design evolution. CODING: MANUFACTURERS IDENTIFICATION, NYLON PARACHUTE CLOTH The Parachute Industry Association makes this document available for use by Industry and Government organizations that wish to apply this specification to their products. 1. SCOPE 1.1 Purpose. This c
3、ommercial specification establishes the weavers identification coding to be used by textile manufacturers for the purpose of identifying their respective products, when so specified by the detailed specification for the material or by the procuring activity. 2. IDENTIFICATION CODE 2.1 Assignment of
4、codes. The identification code below shall be assigned to a weaver of parachute cloth as follows: Manufacturers Name and Address Manufacturer 1: Milliken & Co. 920 Milliken Rd. Spartanburg, SC Manufacturer 2: Precision Fabrics Group, Inc. 301 North Elm Street Greensboro, NC 27401 Manufacturer 3: Sch
5、neider Mills, Inc. 200 Madison Avenue New York, NY 10016 PIA-STD-851F 20 December 2013 Superseding PIA-STD-851E 26 February 2010 DISTRIBUTION STATEMENT: All Rights Reserved. No Part of this publication may be reproduced without prior written permission from Parachute Industry Association. Additional
6、 copies may be purchased on-line from PIA Specifications and Products at: . Copyright Protected: Do Not Copy!PIA-STD-851F Manufacturer 4: Warwick Mills 301 Turnpike Road New Ipswich, NH 03071 Manufacturer 5: Safety Components Fabrics, Inc. 40 Emery St. Greenville, SC 29605 Manufacturer 6: Stern & St
7、ern Industries, Inc. 708 Third Avenue New York, NY 10017 Manufacturer 7: Glen Raven, Filament Fabrics LLC 73 E. US Highway 19E Burnsville, NC 28714 Manufacturer 8: Copland Industries, Inc. 1714 Carolina Mill Road Burlington, North Carolina 27217 (THIS SPACE HAS BEEN INTENTIONALLY LEFT BLANK) Page 2
8、of 4 Copyright Protected: Do Not Copy!PIA-STD-851F 3. INCLUSION REQUESTS 3.1 Additional Nylon Cloth Manufacturers. Manufacturers may request inclusion in this standard by notifying the Parachute Industry Association using contact information below. Membership in PIA is NOT a requirement for being li
9、sted. This listing is limited to those companies that actually weave or manufacture those fabrics referencing this Standard. Page 3 of 4 Copyright Protected: Do Not Copy!PIA-STD-851F 3.2 New code assignments. Upon receipt of request for inclusion, the Parachute Industry Association will notify the m
10、anufacture in writing of their code. * Notice: This document has been adopted from the original Mil-Spec of the same number, and is being maintained as a commercial specification by the Parachute Industry Association. Orders, inquires and comments should be addressed to PIA, Specification Committee
11、via e-mail at: or to our website at: . Copyright1998-2013 Parachute Industry Association. Disclaimer: This document is published by the PIA to provide technical and engineering standards that can be used for reference by all those who may benefit from them. The use of this document is entirely volu
12、ntary, and its applicability and suitability for any particular use, including any patent or trademark infringement arising there from, is the sole responsibility of the user. The original Government document was scanned. The PIA reviews each technical publication periodically, at which time it may be reaffirmed, revised, or canceled. The PIA invites your written comments and suggestions. Page 4 of 4 Copyright Protected: Do Not Copy!
