PS 1636-1984 SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC) FITT-INGS WITH PLAIN SOCKETS FOR PIPES UNDER PRESS-URE-DIMENSIONS OF SOCKETS-METRIC SERIES 《硬质聚氯乙烯的规格 承受一定压力的普.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1504M-2015a Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)《涵洞和下水道用预制钢筋混凝土三面结构制造的标准规格 (米制).pdf

ASTM C1504M-2015e1 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)《涵洞 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规范 (.pdf

ASTM C1504M-2016 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)《涵洞 暴雨排水沟用预制钢筋混凝土三边构件制造的标准规格 (公制.pdf

ASTM C1505-2001(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading《三点负荷法测定陶瓷砖断裂强度的标准试验方法》.pdf

ASTM C1505-2015 Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading《采用三点加载法测定瓷砖和玻璃瓦的断裂强度及破裂模量.pdf

ASTM C1506-2003 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters《基于灰浆和灰泥的水泥的水滞留性的标准试验方法》.pdf

ASTM C1506-2008 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters.pdf

ASTM C1506-2009 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters《基于灰浆和灰泥的水泥的水滞留性的标准试验方法》.pdf

ASTM C1506-2016 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters《水硬性水泥基砂浆和灰泥的保水性的标准试验方法》.pdf