REG NASA-LLIS-0145-1992 Lessons Learned - Portable Hypergol Checkout Panels .pdf

上传人:orderah291 文档编号:1017797 上传时间:2019-03-21 格式:PDF 页数:2 大小:12.62KB
下载 相关 举报
REG NASA-LLIS-0145-1992 Lessons Learned - Portable Hypergol Checkout Panels .pdf_第1页
第1页 / 共2页
REG NASA-LLIS-0145-1992 Lessons Learned - Portable Hypergol Checkout Panels .pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 0145Lesson Info:a71 Lesson Number: 0145a71 Lesson Date: 1992-10-02a71 Submitting Organization: KSCa71 Submitted by: David PenningtonSubject: Portable Hypergol Checkout Panels. Description of Driving Event: The configuration of the portable hypergol checkout panels located on p

2、latforms 6E and 6W in the OPF restricts personnel working in the area from egressing to a safe area. The checkout panels (four per high bay; two per platform) have flexhoses and electrical cables that become entangled and cannot easily be maintained in an orderly arrangement. The flexhoses and cable

3、s also present a tripping hazard and further hinder emergency egress from the platforms. Additionally, these flexhoses leak and are more prone to failure because of their tendency to kink and twist in this configuration.Lesson(s) Learned: Configuration of the portable hypergol checkout panels hinder

4、s emergency egress from platforms 6E and 6W in the OPF.Recommendation(s): Design and install permanently mounted hypergol checkout panels and hardlines placed out of the egress path.Evidence of Recurrence Control Effectiveness: N/AProvided by IHSNot for ResaleNo reproduction or networking permitted

5、without license from IHS-,-,-Documents Related to Lesson: N/AMission Directorate(s): N/AAdditional Key Phrase(s): a71 Facilitiesa71 Human Factorsa71 Risk Management/AssessmentAdditional Info: Approval Info: a71 Approval Date: 1994-06-06a71 Approval Name: James G. Klinea71 Approval Organization: KSC/HEIa71 Approval Phone Number: 407-867-7614Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS EN ISO 4491-4-2013 Metallic powders Determination of oxygen content by reduction methods Total oxygen by reduction-extraction《金属粉末 用还原法测定氧含量 用还原萃取法测定总氧量》.pdf BS EN ISO 4491-4-2013 Metallic powders Determination of oxygen content by reduction methods Total oxygen by reduction-extraction《金属粉末 用还原法测定氧含量 用还原萃取法测定总氧量》.pdf
  • BS EN ISO 4498-2010 Sintered metal materials excluding hardmetals - Determination of apparent hardness and microhardness《不包括硬质金属的烧结金属材料 视硬度和微硬度的测定》.pdf BS EN ISO 4498-2010 Sintered metal materials excluding hardmetals - Determination of apparent hardness and microhardness《不包括硬质金属的烧结金属材料 视硬度和微硬度的测定》.pdf
  • BS EN ISO 4499-1-2010 Hardmetals - Metallographic determination of microstructure - Photomicrographs and description《硬质合金 显微结构的金相学测定 显微照片和描述》.pdf BS EN ISO 4499-1-2010 Hardmetals - Metallographic determination of microstructure - Photomicrographs and description《硬质合金 显微结构的金相学测定 显微照片和描述》.pdf
  • BS EN ISO 4499-2-2010 Hardmetals Metallographic determination of microstructure Measurement of WC grain size《硬质合金 显微组织的金相学测定 WC晶粒尺寸的测量》.pdf BS EN ISO 4499-2-2010 Hardmetals Metallographic determination of microstructure Measurement of WC grain size《硬质合金 显微组织的金相学测定 WC晶粒尺寸的测量》.pdf
  • BS EN ISO 4499-3-2016 Hardmetals Metallographic determination of microstructure Measurement of microstructural features in Ti (C N) and WC cubic carbide based hardmetals《硬质金属 显微组织的.pdf BS EN ISO 4499-3-2016 Hardmetals Metallographic determination of microstructure Measurement of microstructural features in Ti (C N) and WC cubic carbide based hardmetals《硬质金属 显微组织的.pdf
  • BS EN ISO 4499-4-2016 Hardmetals Metallographic determination of microstructure Characterisation of porosity carbon defects and eta-phase content《硬质金属 显微组织的金相测定 孔隙度 碳缺陷和η相含量的表征》.pdf BS EN ISO 4499-4-2016 Hardmetals Metallographic determination of microstructure Characterisation of porosity carbon defects and eta-phase content《硬质金属 显微组织的金相测定 孔隙度 碳缺陷和η相含量的表征》.pdf
  • BS EN ISO 4507-2000 Sintered ferrous materials carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test《渗碳或碳氮共渗的烧结铁基材料 用显微硬度试验测.pdf BS EN ISO 4507-2000 Sintered ferrous materials carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test《渗碳或碳氮共渗的烧结铁基材料 用显微硬度试验测.pdf
  • BS EN ISO 4516-2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests《金属和其他无机镀层 维氏硬度计和努氏显微硬度试验机》.pdf BS EN ISO 4516-2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests《金属和其他无机镀层 维氏硬度计和努氏显微硬度试验机》.pdf
  • BS EN ISO 4518-1980 Metallic coatings - Measurement of coating thickness - Profilometric method《金属覆层 覆层厚度的测量 轮廓仪法》.pdf BS EN ISO 4518-1980 Metallic coatings - Measurement of coating thickness - Profilometric method《金属覆层 覆层厚度的测量 轮廓仪法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1