REG NASA-LLIS-0361-1995 Lessons Learned - Parachute Diameter and Pilot Payload Descent Rate.pdf

上传人:ideacase155 文档编号:1018008 上传时间:2019-03-21 格式:PDF 页数:2 大小:12.73KB
下载 相关 举报
REG NASA-LLIS-0361-1995 Lessons Learned - Parachute Diameter and Pilot Payload Descent Rate.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-0361-1995 Lessons Learned - Parachute Diameter and Pilot Payload Descent Rate.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 0361Lesson Info:a71 Lesson Number: 0361a71 Lesson Date: 1995-10-11a71 Submitting Organization: HQa71 Submitted by: Pete RutledgeSubject: Parachute Diameter and Pilot/Payload Descent Rate Description of Driving Event: The X-31 experimental aircraft used the egress system from t

2、he F-18 fighter aircraft, including its 17 foot diameter main parachute. A test pilot ejected from the X-31 over Edwards Air Force Base, CA. The pilots calculated descent rate was over 28 feet per second. The parachute landing fall resulted in multiple injuries.Photo of the x-31 jet in flightX-31 Ex

3、perimental AircraftLesson(s) Learned: In the case of an over land ejction and depending on pilot/payload weight, the 17 foot diameter main parachute in the F-18 egress system can allow a sufficiently high descent rate as to make parachute landing fall injury highly probable.Recommendation(s): Consid

4、er use of a larger diameter main parachute, especially where ejection is likely to be over land.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Evidence of Recurrence Control Effectiveness: N/ADocuments Related to Lesson: N/AMission Directorate(s): N

5、/AAdditional Key Phrase(s): a71 Aircrafta71 Emergency Preparednessa71 Flight Equipmenta71 Personal Protective Equipmenta71 Safety & Mission AssuranceAdditional Info: Approval Info: a71 Approval Date: 1995-10-12a71 Approval Name: Pete Rutledgea71 Approval Organization: QSa71 Approval Phone Number: 202-358-0579Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS ISO 7267-3-2017 Rubber-covered rollers Determination of apparent hardness Pusey and Jones method《橡胶涂覆滚柱 表观硬度的测定 普西-琼斯(Pusey和Jones)法》.pdf BS ISO 7267-3-2017 Rubber-covered rollers Determination of apparent hardness Pusey and Jones method《橡胶涂覆滚柱 表观硬度的测定 普西-琼斯(Pusey和Jones)法》.pdf
  • BS ISO 727-1-2002 Fittings made from unplasticized poly (vinyl chloride) (PVC-U) chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile butadiene styrene (ABS) with plain socket.pdf BS ISO 727-1-2002 Fittings made from unplasticized poly (vinyl chloride) (PVC-U) chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile butadiene styrene (ABS) with plain socket.pdf
  • BS ISO 727-2-2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U) chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile butadiene styrene (ABS) with plain sockets.pdf BS ISO 727-2-2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U) chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile butadiene styrene (ABS) with plain sockets.pdf
  • BS ISO 7270-2-2012 Rubber Analysis by pyrolytic gas-chromatographic methods Determination of styrene butadiene isoprene ratio《橡胶 采用热解气相色谱法的分析苯乙烯 丁二烯 异戊二烯比率的测定》.pdf BS ISO 7270-2-2012 Rubber Analysis by pyrolytic gas-chromatographic methods Determination of styrene butadiene isoprene ratio《橡胶 采用热解气相色谱法的分析苯乙烯 丁二烯 异戊二烯比率的测定》.pdf
  • BS ISO 7278-3-1998 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pulse interpolation techniques《液态烃 动态测量 容积流量计检验系统 第3部分 脉冲内插技术》.pdf BS ISO 7278-3-1998 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pulse interpolation techniques《液态烃 动态测量 容积流量计检验系统 第3部分 脉冲内插技术》.pdf
  • BS ISO 7278-4-1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers《液态烃 动态测量 容积式流量计校验系统 管道校验仪操作者指南》.pdf BS ISO 7278-4-1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers《液态烃 动态测量 容积式流量计校验系统 管道校验仪操作者指南》.pdf
  • BS ISO 7299-1-2007 Diesel engines - End-mounting flanges for pumps - Fuel injection pumps《柴油发动机 泵用端面安装法兰 燃料油喷射泵》.pdf BS ISO 7299-1-2007 Diesel engines - End-mounting flanges for pumps - Fuel injection pumps《柴油发动机 泵用端面安装法兰 燃料油喷射泵》.pdf
  • BS ISO 7299-2-2009 Diesel engines - End-mounting flanges for pumps - High-pressure supply pumps for common rail fuel injection systems《柴油发动机 泵端面安装法兰 公轨燃料喷射系统用高压供给泵》.pdf BS ISO 7299-2-2009 Diesel engines - End-mounting flanges for pumps - High-pressure supply pumps for common rail fuel injection systems《柴油发动机 泵端面安装法兰 公轨燃料喷射系统用高压供给泵》.pdf
  • BS ISO 7301-2011 Rice Specification《稻米 规格》.pdf BS ISO 7301-2011 Rice Specification《稻米 规格》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1