REG NASA-LLIS-0785--2000 Lessons Learned Assembly Acoustic Tests.pdf

上传人:medalangle361 文档编号:1018431 上传时间:2019-03-21 格式:PDF 页数:3 大小:14.64KB
下载 相关 举报
REG NASA-LLIS-0785--2000 Lessons Learned Assembly Acoustic Tests.pdf_第1页
第1页 / 共3页
REG NASA-LLIS-0785--2000 Lessons Learned Assembly Acoustic Tests.pdf_第2页
第2页 / 共3页
REG NASA-LLIS-0785--2000 Lessons Learned Assembly Acoustic Tests.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Best Practices Entry: Best Practice Info:a71 Committee Approval Date: 2000-04-14a71 Center Point of Contact: JPLa71 Submitted by: Wil HarkinsSubject: Assembly Acoustic Tests Practice: Subject selected (large surface area, low mass) assemblies, in addition to the full-up flight system, to acoustic no

2、ise. It is imperative on missions with fixed launch windows that acoustic problems on assemblies not be deferred to system level tests.Abstract: Preferred Practice for Design however, the actual acoustic wave angle of incidence distribution is seldom known. In practice, employing a random-incidence

3、acoustic test envelops the effects of the flight environment.Acoustic noise is usually the most severe dynamic environment for a launch vehicle or payload in the mid to high frequency range ( 50 to 2000 Hz). The acoustic pressure fluctuations will induce severe vibrations in relatively large lightwe

4、ight structures, such as solar panels and reflectors, potentially causing failures of the structure or attached electrical components. These structures should be acoustically tested at the assembly level to avoid potential cost and schedule impacts of a failure during system level testing. The full

5、up spacecraft acoustic test provides verification of the integrated system for the vibroacoustic environment, including verification of the adequacy of assembly random vibration requirements. The acoustic test also qualifies spacecraft elements, such as blankets, cable harnesses, plumbing lines, and

6、 secondary structure not tested at the assembly level.Impact of Non-Practice: The probability of failure during systems acoustic testing, or during flight due to the acoustic environment, is increased.Related Practices: N/AProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Additional Info: Approval Info: a71 Approval Date: 2000-04-14a71 Approval Name: Eric Raynora71 Approval Organization: QSa71 Approval Phone Number: 202-358-4738Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS EN ISO 3834-2-2006 Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements《金属材料熔焊的质量要求 综合质量要求》.pdf BS EN ISO 3834-2-2006 Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements《金属材料熔焊的质量要求 综合质量要求》.pdf
  • BS EN ISO 3834-3-2006 Quality requirements for fusion welding of metallic materials - Standard quality requirements《金属材料熔焊的质量要求 标准质量要求》.pdf BS EN ISO 3834-3-2006 Quality requirements for fusion welding of metallic materials - Standard quality requirements《金属材料熔焊的质量要求 标准质量要求》.pdf
  • BS EN ISO 3834-4-2006 Quality requirements for fusion welding of metallic materials - Elementary quality requirements《金属材料熔焊的质量要求 基本质量要求》.pdf BS EN ISO 3834-4-2006 Quality requirements for fusion welding of metallic materials - Elementary quality requirements《金属材料熔焊的质量要求 基本质量要求》.pdf
  • BS EN ISO 3834-5-2015 Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements .pdf BS EN ISO 3834-5-2015 Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements .pdf
  • BS EN ISO 385-2005 Laboratory glassware - Burettes《实验室玻璃器皿 滴定管》.pdf BS EN ISO 385-2005 Laboratory glassware - Burettes《实验室玻璃器皿 滴定管》.pdf
  • BS EN ISO 3861-2008 Rubber hoses for sand and grit blasting - Specification《沙子和喷钢砂处理用橡胶软管 规范》.pdf BS EN ISO 3861-2008 Rubber hoses for sand and grit blasting - Specification《沙子和喷钢砂处理用橡胶软管 规范》.pdf
  • BS EN ISO 3868-1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method《金属和其他无机物涂层 涂层厚度测量 菲索(Fizeau)多光束干涉仪法》.pdf BS EN ISO 3868-1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method《金属和其他无机物涂层 涂层厚度测量 菲索(Fizeau)多光束干涉仪法》.pdf
  • BS EN ISO 3882-2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness《金属和其他无机物覆层 厚度测量方法述评》.pdf BS EN ISO 3882-2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness《金属和其他无机物覆层 厚度测量方法述评》.pdf
  • BS EN ISO 389-3-2016 Acoustics Reference zero for the calibration of audiometric equipment Reference equivalent threshold vibratory force levels for pure tones and bone vibrators《声.pdf BS EN ISO 389-3-2016 Acoustics Reference zero for the calibration of audiometric equipment Reference equivalent threshold vibratory force levels for pure tones and bone vibrators《声.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1