REG NASA-LLIS-0986-2001 Lessons Learned Tight scheduling and New Unfamiliar Equipment in Hazardous Environments.pdf

上传人:arrownail386 文档编号:1018631 上传时间:2019-03-21 格式:PDF 页数:3 大小:14.33KB
下载 相关 举报
REG NASA-LLIS-0986-2001 Lessons Learned Tight scheduling and New Unfamiliar Equipment in Hazardous Environments.pdf_第1页
第1页 / 共3页
REG NASA-LLIS-0986-2001 Lessons Learned Tight scheduling and New Unfamiliar Equipment in Hazardous Environments.pdf_第2页
第2页 / 共3页
REG NASA-LLIS-0986-2001 Lessons Learned Tight scheduling and New Unfamiliar Equipment in Hazardous Environments.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 0986Lesson Info:a71 Lesson Number: 0986a71 Lesson Date: 2001-08-01a71 Submitting Organization: JSCa71 Submitted by: John WintersSubject: Tight scheduling and New Unfamiliar Equipment in Hazardous Environments Description of Driving Event: High voltage linemen were on very tigh

2、t time constraints and were attempting to measure the voltage in a 15kV fuse cabinet. They were going to measure the voltage from phase to ground of approximately 7630 volts. The equipment they were using is engineered to contact high power lines or transformers out in the open for direct readings.

3、The linemen had contacted the phase conductor with one probe of the test meter and were attempting to make contact with a ground point in the fuse cabinet of the transformer when an electric flash occurred, indicating a ground fault. The ground fault went through and out of the back of the meter gro

4、und faulting to the cabinet enclosure. No one was injured but the fault caused an immediate interruption of power to the site electric feeder.Lesson(s) Learned: Using new equipment in hazardous environments without full understanding all the capabilities and restrictions can easily cause injury or e

5、quipment destruction. Add to this dangerous situation the “hurry up, lets get this job done“ attitude, is only adding fuel to an accident waiting to happen.Recommendation(s): Be sure training is thorough. All persons who will use the equipment (supervisors and technicians) need to understand the app

6、lication and restrictions of the new equipment. Do not let tight time constraints take precedence over any activity. Ensure all personnel understand their safety and other performance responsibilities and fully understand the new equipment and tasks.Evidence of Recurrence Control Effectiveness: N/AP

7、rovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Documents Related to Lesson: N/AMission Directorate(s): a71 Exploration Systemsa71 Sciencea71 Space Operationsa71 Aeronautics ResearchAdditional Key Phrase(s): a71 Configuration Managementa71 Energya71 F

8、acilitiesa71 Fire Protectiona71 Flight Operationsa71 Flight Equipmenta71 Ground Operationsa71 Ground Equipmenta71 Human Factorsa71 Human Resources & Educationa71 Industrial Operationsa71 Lifting Devicesa71 Packaging Handling Storagea71 Personal Protective Equipmenta71 Pressure Vesselsa71 Risk Manage

9、ment/Assessmenta71 Safety & Mission Assurancea71 Test Articlea71 Test Facilitya71 Test & Verificationa71 Training EquipmentAdditional Info: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Approval Info: a71 Approval Date: 2001-08-07a71 Approval Name: Ron Montaguea71 Approval Organization: JSCa71 Approval Phone Number: 281-483-8576Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSB-M2D280-A7-2009 SILICONE ELASTOMER (VMQ) NONLUBRICATED  TO BE USED WITH FORD WSS-M99P1111-A  《不润滑的硅酮弹性体(VMQ)  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSB-M2D280-A7-2009 SILICONE ELASTOMER (VMQ) NONLUBRICATED TO BE USED WITH FORD WSS-M99P1111-A 《不润滑的硅酮弹性体(VMQ) 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSB-M2D386-A1-2009 SILICONE ELASTOMER (MQ) INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《固有润滑的硅酮弹性体(MQ)液体注模成型料  与标准FOR.pdf FORD WSB-M2D386-A1-2009 SILICONE ELASTOMER (MQ) INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《固有润滑的硅酮弹性体(MQ)液体注模成型料 与标准FOR.pdf
  • FORD WSB-M2D402-A3-2007 POLYURETHANE (PUR) FOAM HIGH RESILIENT  TO BE USED WITH FORD WSS-M99P1111-A  《高弹性聚氨酯(PUR)泡沫  与标准FORD WSS-M99P1111-A一起使用  [使用 FORD WSS-M15P20-B1 FORD WSS-M15.pdf FORD WSB-M2D402-A3-2007 POLYURETHANE (PUR) FOAM HIGH RESILIENT TO BE USED WITH FORD WSS-M99P1111-A 《高弹性聚氨酯(PUR)泡沫 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M15P20-B1 FORD WSS-M15.pdf
  • FORD WSB-M2D409-A-2006 POLYURETHANE (PUR) FOAM ACOUSTICAL 64 KG M3  TO BE USED WITH FORD WSS-M99P1111-A  《64 KG M3声学用聚氨酯(PUR)泡沫  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSB-M2D409-A-2006 POLYURETHANE (PUR) FOAM ACOUSTICAL 64 KG M3 TO BE USED WITH FORD WSS-M99P1111-A 《64 KG M3声学用聚氨酯(PUR)泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSB-M2D452-A-2010 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《汽车内部用热塑性弹性体(TEEE)成型料  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSB-M2D452-A-2010 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性弹性体(TEEE)成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSB-M2D452-A2-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSB-M2D452-A)《汽车内部用热塑性弹性体(TEEE)成型料  与标准FORD WSS-M99.pdf FORD WSB-M2D452-A2-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M2D452-A)《汽车内部用热塑性弹性体(TEEE)成型料 与标准FORD WSS-M99.pdf
  • FORD WSB-M2D456-A-2009 POLYURETHANE (PUR) FOAM CAST  TO BE USED WITH FORD WSS-M99P1111-A  《聚氨酯(PUR)泡沫铸件  与标准FORD WSS-M99P1111-A一起使用  [使用 FORD WSS-M99P32-C]》.pdf FORD WSB-M2D456-A-2009 POLYURETHANE (PUR) FOAM CAST TO BE USED WITH FORD WSS-M99P1111-A 《聚氨酯(PUR)泡沫铸件 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M99P32-C]》.pdf
  • FORD WSB-M2D462-A1-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 60 A HARDNESS EXTERIOR ONLY  TO BE USED WITH FORD WSS-M99P1111-A  《仅外部硬度为60A的含氟乙烯[TE(PE-C)]热塑性弹性体  与.pdf FORD WSB-M2D462-A1-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 60 A HARDNESS EXTERIOR ONLY TO BE USED WITH FORD WSS-M99P1111-A 《仅外部硬度为60A的含氟乙烯[TE(PE-C)]热塑性弹性体 与.pdf
  • FORD WSB-M2D462-A2-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 70 A HARDNESS EXTERIOR ONLY  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSB-M2D462-A1)《仅外部硬.pdf FORD WSB-M2D462-A2-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 70 A HARDNESS EXTERIOR ONLY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2D462-A1)《仅外部硬.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1