REG NASA-LLIS-1268-2002 Lessons Learned Post-Environmental Testing.pdf

上传人:proposalcash356 文档编号:1018907 上传时间:2019-03-21 格式:PDF 页数:2 大小:12.47KB
下载 相关 举报
REG NASA-LLIS-1268-2002 Lessons Learned Post-Environmental Testing.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-1268-2002 Lessons Learned Post-Environmental Testing.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 1268Lesson Info:a71 Lesson Number: 1268a71 Lesson Date: 2002-07-31a71 Submitting Organization: GSFCa71 Submitted by: Richard FitzgeraldSubject: Post-Environmental Testing Description of Driving Event: Several unplanned post-launch tests were run on a mission in the post-enviro

2、nmental test timeframe, which, in fact, uncovered several important problems, which needed correction.Lesson(s) Learned: A post-environmental systems test of the final satellite flight configuration must be planned and executedRecommendation(s): A “quiet“ test of 100 hours or more is necessary to as

3、sure that the system is still functioning properly and to fully characterize its performance. In addition, an attitude control system polarity check must be performed. Evidence of Recurrence Control Effectiveness: N/ADocuments Related to Lesson: N/AMission Directorate(s): Provided by IHSNot for Resa

4、leNo reproduction or networking permitted without license from IHS-,-,-a71 Exploration Systemsa71 Aeronautics ResearchAdditional Key Phrase(s): a71 Test & VerificationAdditional Info: Approval Info: a71 Approval Date: 2002-08-12a71 Approval Name: Al Galloa71 Approval Organization: GSFCa71 Approval Phone Number: 301-286-3756Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • EN 19694-5-2016 en Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5 Lime industry《固定源排放 能源密集型工业中温室气体排放的测定 第5部分 .pdf EN 19694-5-2016 en Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5 Lime industry《固定源排放 能源密集型工业中温室气体排放的测定 第5部分 .pdf
  • EN 19694-6-2016 en Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6 Ferroalloy industry《固定源排放 能源密集型工业中温室气体排放的测定.pdf EN 19694-6-2016 en Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6 Ferroalloy industry《固定源排放 能源密集型工业中温室气体排放的测定.pdf
  • EN 20105-A02-1994 en Textiles - Tests for Colour Fastness - Part A02 Grey Scale for Assessing Change in Colour《纺织品 色牢度试验 第A02部分 颜色变化评定用灰度标》.pdf EN 20105-A02-1994 en Textiles - Tests for Colour Fastness - Part A02 Grey Scale for Assessing Change in Colour《纺织品 色牢度试验 第A02部分 颜色变化评定用灰度标》.pdf
  • EN 20105-A03-1994 en Textiles - Tests for Colour Fastness - Part A03 Grey Scale for Assessing Staining《纺织品 色牢度试验 第A03部分 沾污评定的灰度标[ISO 105-A03-1993]》.pdf EN 20105-A03-1994 en Textiles - Tests for Colour Fastness - Part A03 Grey Scale for Assessing Staining《纺织品 色牢度试验 第A03部分 沾污评定的灰度标[ISO 105-A03-1993]》.pdf
  • EN 20105-N01-1995 en Textiles - Tests for Colour Fastness - Part N01 Colour Fastness to Bleaching Hypochlorite《纺织品 色牢度试验 第N01部分 耐漂白色牢度 次氯酸盐(ISO 105-N01-1993)》.pdf EN 20105-N01-1995 en Textiles - Tests for Colour Fastness - Part N01 Colour Fastness to Bleaching Hypochlorite《纺织品 色牢度试验 第N01部分 耐漂白色牢度 次氯酸盐(ISO 105-N01-1993)》.pdf
  • EN 20273-1991 en Fasteners - Clearance Holes for Bolts and Screws《紧固件 螺栓和螺钉通孔》.pdf EN 20273-1991 en Fasteners - Clearance Holes for Bolts and Screws《紧固件 螺栓和螺钉通孔》.pdf
  • EN 20594-1 A1-1997 Conical fittings with a 6% (Luer) taper for syringes needles and certain other medical equipment - Part 1 General requirements (ISO 594-1 1986) Amendment A1《注射器、.pdf EN 20594-1 A1-1997 Conical fittings with a 6% (Luer) taper for syringes needles and certain other medical equipment - Part 1 General requirements (ISO 594-1 1986) Amendment A1《注射器、.pdf
  • EN 20594-1-1993 en Conical Fittings with a 6% (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1 General Requirements (Incorporates Amendment A1 1997)《注.pdf EN 20594-1-1993 en Conical Fittings with a 6% (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1 General Requirements (Incorporates Amendment A1 1997)《注.pdf
  • EN 20693-1991 en Dimensions of Seam Welding Wheel Blanks《缝焊轮坯尺寸 (ISO 693-82)》.pdf EN 20693-1991 en Dimensions of Seam Welding Wheel Blanks《缝焊轮坯尺寸 (ISO 693-82)》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1