REG NASA-LLIS-1354--2003 Lessons Learned ADEOS-II NGN L0 Data Gap Introduction Problem.pdf

上传人:jobexamine331 文档编号:1018993 上传时间:2019-03-21 格式:PDF 页数:2 大小:13.04KB
下载 相关 举报
REG NASA-LLIS-1354--2003 Lessons Learned ADEOS-II NGN L0 Data Gap Introduction Problem.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-1354--2003 Lessons Learned ADEOS-II NGN L0 Data Gap Introduction Problem.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 1354Lesson Info:a71 Lesson Number: 1354a71 Lesson Date: 2003-07-16a71 Submitting Organization: GSFCa71 Submitted by: Bonita SeatonSubject: ADEOS-II NGN L0 Data Gap Introduction Problem Description of Driving Event: In early February 2003, JPL and NASDA reported gaps in Level 0

2、 data products received from the Wallops and Alaska ADEOS-II Data Processing Systems. Gaps in the SeaWinds product were characterized by JPL to be intermittent in nature, of variable size, and located at irregular intervals in the data products. Reprocessing of the raw data by NASDA yielded 100% dat

3、a recovery. Thus, while there was 100% data capture, data gaps were introduced by the DS resulting in approximately 8% data loss in the Level 0 product (i.e. 8 out of every 100 minutes of data was not included in the Level 0 product). These gaps were undetected at the processing station until report

4、ed by JPL and NASDA.Lesson(s) Learned: Provide a test/migration suiteRecommendation(s): Recognize the continuing need for and establish a test/migration bed for ground system development efforts. This test/migration bed should be able to perform or simulate the same functions as the operational syst

5、em and should have the same configuration in terms of platform versions, operating systems, configuration parameters, etc. This will provide a place for on-going troubleshooting, revision testing with reduced impact to on-going operations. Alternatively, if the system is developed with a cold or hot

6、 back-up system and if allowed by the system requirements, the back-up system could be used as a test/migration bed. This will create periods where a back-up is not available, but will provide a “safe“ place for problem isolation, testing, and possibly, data analysis. If the back-up system is to be

7、used as a test bed, develop detailed procedures and policies on test/migration use to safeguard the operational system. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Evidence of Recurrence Control Effectiveness: N/ADocuments Related to Lesson: N/AM

8、ission Directorate(s): a71 ScienceAdditional Key Phrase(s): a71 Configuration Managementa71 Ground Equipmenta71 Ground Operationsa71 Test & VerificationAdditional Info: Approval Info: a71 Approval Date: 2003-07-29a71 Approval Name: Al Galloa71 Approval Organization: GSFCa71 Approval Phone Number: 301-286-3756Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN 32786-1980 Bankdocuments magnetic stripes on passbooks data content for the track《银行凭证 银行存折上的磁条 磁道的数据内容》.pdf DIN 32786-1980 Bankdocuments magnetic stripes on passbooks data content for the track《银行凭证 银行存折上的磁条 磁道的数据内容》.pdf
  • DIN 32835-1-2007 Technical product documentation - Facility management documentation - Part 1 Concepts and methodology《技术产品文件 设备管理文件 第1部分 概念和方法学》.pdf DIN 32835-1-2007 Technical product documentation - Facility management documentation - Part 1 Concepts and methodology《技术产品文件 设备管理文件 第1部分 概念和方法学》.pdf
  • DIN 32835-2-2007 Technical product documentation - Facility management documentation - Part 2 Building occupancy documentation《技术产品文件 设备管理文件 第2部分 建筑物用文件》.pdf DIN 32835-2-2007 Technical product documentation - Facility management documentation - Part 2 Building occupancy documentation《技术产品文件 设备管理文件 第2部分 建筑物用文件》.pdf
  • DIN 32869-1-2011 Technical product documentation - Three-dimensional CAD-models - Part 1 Requirements for representation《技术产品文件 三维CAD-模型 第1部分 表示要求》.pdf DIN 32869-1-2011 Technical product documentation - Three-dimensional CAD-models - Part 1 Requirements for representation《技术产品文件 三维CAD-模型 第1部分 表示要求》.pdf
  • DIN 32869-3-2012 Technical product documentation - Three-dimensional CAD-models - Part 3 Features《技术产品文件 三维CAD(计算机辅助设计)模型 第3部分 特征》.pdf DIN 32869-3-2012 Technical product documentation - Three-dimensional CAD-models - Part 3 Features《技术产品文件 三维CAD(计算机辅助设计)模型 第3部分 特征》.pdf
  • DIN 32876-1-1999 Verification of geometrical parameters - Electrical linear measurement - Part 1 Analogue reception of the measured quantity concepts requirements testing《几何参数的验证 电.pdf DIN 32876-1-1999 Verification of geometrical parameters - Electrical linear measurement - Part 1 Analogue reception of the measured quantity concepts requirements testing《几何参数的验证 电.pdf
  • DIN 32876-2-1999 Verification of geometrical parameters - Electrical linear measurement - Part 2 Digital reception of the measured quantity concepts requirements testing《几何参数的验证 电子.pdf DIN 32876-2-1999 Verification of geometrical parameters - Electrical linear measurement - Part 2 Digital reception of the measured quantity concepts requirements testing《几何参数的验证 电子.pdf
  • DIN 32877-2000 Optoelectronic measurement of distance profile and form《距离、轮廓和形式的光电测量》.pdf DIN 32877-2000 Optoelectronic measurement of distance profile and form《距离、轮廓和形式的光电测量》.pdf
  • DIN 32891-1996 Round steel link chains - Grade 2 non-calibrated tested《圆钢链 质量等级2 不按量规检验》.pdf DIN 32891-1996 Round steel link chains - Grade 2 non-calibrated tested《圆钢链 质量等级2 不按量规检验》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1