REG NASA-LLIS-1356-2003 Lessons Learned ADEOS-II NGN L0 Data Gap Introduction Problem.pdf

上传人:jobexamine331 文档编号:1018995 上传时间:2019-03-21 格式:PDF 页数:2 大小:13KB
下载 相关 举报
REG NASA-LLIS-1356-2003 Lessons Learned ADEOS-II NGN L0 Data Gap Introduction Problem.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-1356-2003 Lessons Learned ADEOS-II NGN L0 Data Gap Introduction Problem.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 1356Lesson Info:a71 Lesson Number: 1356a71 Lesson Date: 2003-07-16a71 Submitting Organization: GSFCa71 Submitted by: Bonita SeatonSubject: ADEOS-II NGN L0 Data Gap Introduction Problem Description of Driving Event: In early February 2003, JPL and NASDA reported gaps in Level 0

2、 data products received from the Wallops and Alaska ADEOS-II Data Processing Systems. Gaps in the SeaWinds product were characterized by JPL to be intermittent in nature, of variable size, and located at irregular intervals in the data products. Reprocessing of the raw data by NASDA yielded 100% dat

3、a recovery. Thus, while there was 100% data capture, data gaps were introduced by the DS resulting in approximately 8% data loss in the Level 0 product (i.e. 8 out of every 100 minutes of data was not included in the Level 0 product). These gaps were undetected at the processing station until report

4、ed by JPL and NASDA.Lesson(s) Learned: Assess full budget impacts of launch delays and plan for technology refreshRecommendation(s): Complete cost analysis should look beyond continuing current efforts and capabilities to identify new needs that might result from the launch delay. One such example i

5、s technology refresh. Another example might include the need to repeat training as the time between training and operations extends, the liklihood of personnel loss increases. When significant launch delays occur either individually or as a result of a series of delays, conduct sustaining engineerin

6、g analysis to verify that equipment aging has not become an issue. Contingency funding should be included in budgets to offset this issue. Evidence of Recurrence Control Effectiveness: N/AProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Documents Rela

7、ted to Lesson: N/AMission Directorate(s): a71 Sciencea71 Space Operationsa71 Exploration SystemsAdditional Key Phrase(s): a71 Administration/Organizationa71 Ground Equipmenta71 Ground Operationsa71 Launch ProcessAdditional Info: Approval Info: a71 Approval Date: 2003-07-29a71 Approval Name: Al Galloa71 Approval Organization: GSFCa71 Approval Phone Number: 301-286-3756Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASD-STAN PREN 2369-1983 Wires Heat Resisting Alloys Diameter 0 2 mm Less Than or Equal to D Less Than or Equal to 8 mm Dimensions Aerospace Series (Edition 1)《航空航天系列 0 2mm≤直径D≤8mm的.pdf ASD-STAN PREN 2369-1983 Wires Heat Resisting Alloys Diameter 0 2 mm Less Than or Equal to D Less Than or Equal to 8 mm Dimensions Aerospace Series (Edition 1)《航空航天系列 0 2mm≤直径D≤8mm的.pdf
  • ASD-STAN PREN 2375-1989 Aerospace Series Resin Preimpregnated Materials Production Batch Sampling Procedure (Edition 1)《航空航天系列 树脂预浸渍材料生产的成批采样程序 第1版》.pdf ASD-STAN PREN 2375-1989 Aerospace Series Resin Preimpregnated Materials Production Batch Sampling Procedure (Edition 1)《航空航天系列 树脂预浸渍材料生产的成批采样程序 第1版》.pdf
  • ASD-STAN PREN 2378-1988 Aerospace Series Fibre Reinforced Plastics Determination of Water Absorption by Immersion in Demineralised Water (Issue P 1)《航空航天系列 纤维增强塑料 通过在软化水中浸泡测定吸水率 第P.pdf ASD-STAN PREN 2378-1988 Aerospace Series Fibre Reinforced Plastics Determination of Water Absorption by Immersion in Demineralised Water (Issue P 1)《航空航天系列 纤维增强塑料 通过在软化水中浸泡测定吸水率 第P.pdf
  • ASD-STAN PREN 2379-1994 Aerospace Series Fluids for Assessment of Non-Metallic Materials (Edition P 1)《航空航天系列 非金属材料评估用流体 第P1版》.pdf ASD-STAN PREN 2379-1994 Aerospace Series Fluids for Assessment of Non-Metallic Materials (Edition P 1)《航空航天系列 非金属材料评估用流体 第P1版》.pdf
  • ASD-STAN PREN 2380-1983 Aluminium Alloy 7075-T73 Forgings a Less Than or Equal to 125 mm Aerospace Series (Edition 1)《航空航天系列 铝合金7075-T73制a≤125mm的锻件 第1版》.pdf ASD-STAN PREN 2380-1983 Aluminium Alloy 7075-T73 Forgings a Less Than or Equal to 125 mm Aerospace Series (Edition 1)《航空航天系列 铝合金7075-T73制a≤125mm的锻件 第1版》.pdf
  • ASD-STAN PREN 2381-1983 Aluminium Alloy 7009-T73652 Hand Forgings a Less Than or Equal to 150 mm Aerospace Series (Edition 1)《航空航天系列 铝合金7009-T73652制a≤150mm的手制锻件 第1版》.pdf ASD-STAN PREN 2381-1983 Aluminium Alloy 7009-T73652 Hand Forgings a Less Than or Equal to 150 mm Aerospace Series (Edition 1)《航空航天系列 铝合金7009-T73652制a≤150mm的手制锻件 第1版》.pdf
  • ASD-STAN PREN 2382-1998 Aluminium Alloy 2214-T6 Forgings a Less Than or Equal to 100 mm Aerospace Series (Edition 2)《航空航天系列 铝合金2214-T6制a≤100mm的锻件 第2版》.pdf ASD-STAN PREN 2382-1998 Aluminium Alloy 2214-T6 Forgings a Less Than or Equal to 100 mm Aerospace Series (Edition 2)《航空航天系列 铝合金2214-T6制a≤100mm的锻件 第2版》.pdf
  • ASD-STAN PREN 2383-1998 Aluminium Alloy 2214-T4 Forgings a Less Than or Equal to 100 mm Aerospace Series (Edition 2)《航空航天系列 铝合金2214-T4制a≤100mm的锻件 第2版》.pdf ASD-STAN PREN 2383-1998 Aluminium Alloy 2214-T4 Forgings a Less Than or Equal to 100 mm Aerospace Series (Edition 2)《航空航天系列 铝合金2214-T4制a≤100mm的锻件 第2版》.pdf
  • ASD-STAN PREN 2384-1983 Aluminium Alloy 2014A-T6511 Bars and Sections a Less Than or Equal to 150 mm Aerospace Series (Edition 1)《航空航天系列 铝合金2014A-T6511制a≤150mm的棒材和型材 第1版》.pdf ASD-STAN PREN 2384-1983 Aluminium Alloy 2014A-T6511 Bars and Sections a Less Than or Equal to 150 mm Aerospace Series (Edition 1)《航空航天系列 铝合金2014A-T6511制a≤150mm的棒材和型材 第1版》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1