REG NASA-LLIS-1458--2003 Lessons Learned - Accident Investigations Recorders.pdf

上传人:王申宇 文档编号:1019096 上传时间:2019-03-21 格式:PDF 页数:2 大小:12.96KB
下载 相关 举报
REG NASA-LLIS-1458--2003 Lessons Learned - Accident Investigations Recorders.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-1458--2003 Lessons Learned - Accident Investigations Recorders.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 1458Lesson Info:a71 Lesson Number: 1458a71 Lesson Date: 2003-08-31a71 Submitting Organization: JSCa71 Submitted by: David LengyelSubject: Accident Investigations/Recorders Abstract: Ground rules, methods, and equipment for witness interview transcription, review, and revision

2、should be established up front to preclude subsequent issues.Description of Driving Event: The Columbia Accident Investigation Board (CAIB) experimented with different methods to record private witness interviews creating problems with transcriptions.Lesson(s) Learned: For accident investigations, g

3、round rules, processes and equipment necessary for review and revision of transcribed interviews should be established prior to the first interview.Recommendation(s): a71 Assign a Support Staff member to pre-test recording equipment under a variety of circumstances (e.g. where interviews will actual

4、ly take place) to make certain it will accomplish the task it is intended to accomplish.a71 Address room logistics, including room size, access control, and documentation control.a71 Use analog tape (not digital) for electronic recorders; it is easier to copy and duplicate, and the files are in a st

5、andard format unlike some digital devices. Laptop-based recording did not work for this investigation. Evidence of Recurrence Control Effectiveness: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TBD NASA ResponseDocuments Related to Lesson: Agency

6、Contingency Action Plan for Space Flight OperationsMission Directorate(s): a71 Space Operationsa71 Exploration SystemsAdditional Key Phrase(s): a71 Accident Investigationa71 Administration/Organizationa71 Computersa71 Configuration Managementa71 Information Technology/Systemsa71 Logisticsa71 NASA St

7、andardsa71 Policy & Planninga71 Safety & Mission AssuranceAdditional Info: Approval Info: a71 Approval Date: 2004-06-16a71 Approval Name: Ronald Montaguea71 Approval Organization: JSCa71 Approval Phone Number: 281-483-8576Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • GOST 26390-1984 Hook mechanisms for strip feeding maximum width 200 mm Basic and coupling dimensions《宽度为200mm带材进给用钩式机构 基本尺寸和连接尺寸》.pdf GOST 26390-1984 Hook mechanisms for strip feeding maximum width 200 mm Basic and coupling dimensions《宽度为200mm带材进给用钩式机构 基本尺寸和连接尺寸》.pdf
  • GOST 26391-1984 Ball-wedge mechanisms for wire feeding diameter from 1 to 3 mm Basic and coupling dimensions《直径为1mm~3mm线材进给用球楔式机构 基本尺寸和连接尺寸》.pdf GOST 26391-1984 Ball-wedge mechanisms for wire feeding diameter from 1 to 3 mm Basic and coupling dimensions《直径为1mm~3mm线材进给用球楔式机构 基本尺寸和连接尺寸》.pdf
  • GOST 26392-1984 Nuclear safety Terms and definitions《核安全 术语和定义》.pdf GOST 26392-1984 Nuclear safety Terms and definitions《核安全 术语和定义》.pdf
  • GOST 26393-1984 Polyethylene Method for determination of extractable substances content by diethyl ether《聚乙烯 乙醚提取物测定法》.pdf GOST 26393-1984 Polyethylene Method for determination of extractable substances content by diethyl ether《聚乙烯 乙醚提取物测定法》.pdf
  • GOST 26394-1984 Tools for cold upset automatic machines Hard alloy insert cutters for cutting off bolt blanks with shank length up to five diameters Construction and dimensions《自动冷.pdf GOST 26394-1984 Tools for cold upset automatic machines Hard alloy insert cutters for cutting off bolt blanks with shank length up to five diameters Construction and dimensions《自动冷.pdf
  • GOST 26395-1984 Tools for cold upset automatic machines Hard alloy in sert cutters for cutting off bolt blanks with shank length above five diameters Construction and dimensions《自动.pdf GOST 26395-1984 Tools for cold upset automatic machines Hard alloy in sert cutters for cutting off bolt blanks with shank length above five diameters Construction and dimensions《自动.pdf
  • GOST 26396-1984 Tools for cold upset automatic machines Dies for cutting off bolt blanks Construction and dimensions《自动冷镦机的工具 螺栓毛坯切断用阴模 结构及尺寸》.pdf GOST 26396-1984 Tools for cold upset automatic machines Dies for cutting off bolt blanks Construction and dimensions《自动冷镦机的工具 螺栓毛坯切断用阴模 结构及尺寸》.pdf
  • GOST 26397-1984 Tools for cold upset automatic machines Bolt heading dies Construction and dimensions《自动冷镦机的工具 镦制螺栓用阴模 结构及尺寸》.pdf GOST 26397-1984 Tools for cold upset automatic machines Bolt heading dies Construction and dimensions《自动冷镦机的工具 镦制螺栓用阴模 结构及尺寸》.pdf
  • GOST 26398-1984 Tools for cold upset automatic machines Bolt heading dies with shank reducing Construction and dimensions《自动冷镦机的工具 螺栓镦制带缩经用阴模 结构及尺寸》.pdf GOST 26398-1984 Tools for cold upset automatic machines Bolt heading dies with shank reducing Construction and dimensions《自动冷镦机的工具 螺栓镦制带缩经用阴模 结构及尺寸》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1