REG NASA-LLIS-5477-2010 Lessons Learned - Enhanced Fuel Cell Repair Capability at KSC.pdf

上传人:progressking105 文档编号:1019503 上传时间:2019-03-21 格式:PDF 页数:3 大小:160.54KB
下载 相关 举报
REG NASA-LLIS-5477-2010 Lessons Learned - Enhanced Fuel Cell Repair Capability at KSC.pdf_第1页
第1页 / 共3页
REG NASA-LLIS-5477-2010 Lessons Learned - Enhanced Fuel Cell Repair Capability at KSC.pdf_第2页
第2页 / 共3页
REG NASA-LLIS-5477-2010 Lessons Learned - Enhanced Fuel Cell Repair Capability at KSC.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Public Lessons Learned Entry: 5477 Lesson Info: Lesson Number: 5477 Lesson Date: 2010-08-14 Submitting Organization: KSC Submitted by: Annette Pitt Subject: Enhanced Fuel Cell Repair Capability at KSC Abstract: When fuel cell power plants (FCPs) were developed for the Space Shuttle, KSC had minimal

2、capability to repair them. As a result, even FCPs needing only minor repairs had to be returned to the vendor for repair. In the future, FCPs should be designed to maximize the use of modular components and other features that would allow a significant portion of necessary repair work (including com

3、ponent replacement) to be performed at KSC. This would include components in the accessory section and single cells or fuel cell stacks. Performing these repairs at KSC would eliminate the need to send entire power plants back to the vendor. KSC could save time and money by using modular FCPs that K

4、SC workers can repair. Description of Driving Event: Throughout the Shuttle Program, it was often necessary to send entire FCPs back to the vendor for repair of defects or for removal and replacement operations. This was expensive and time-consuming, especially when other FCPs had to be obtained bec

5、ause none were available in Logistics. In some instances, KSC had to bring in vendor technicians to repair FCPs onsite. Lesson(s) Learned: KSC has a tremendous and skilled workforce and first-rate logistics and shops that can perform much of the FCP repair work, especially on modular designs. Shuttl

6、e Fuel Cell Powerplant Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Shuttle Fuel Cell Powerplants are installed in Orbiter mid-body bays. Recommendation(s): KSC engineers should be actively engaged in designing fuel cells for use in future spacecr

7、aft or other KSC operations. That way, the designs can reflect the advantage of performing more of the repair work at KSC. Evidence of Recurrence Control Effectiveness: N/A Documents Related to Lesson: N/A Mission Directorate(s): Exploration Systems Space Operations Additional Key Phrase(s): 1.Parts

8、, Materials, & Processes 1.Acquisition / procurement strategy and planning Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.Requirements critical to costing and cost credibility 1.Engineering design and project processes and standards 1.Human factor

9、s planning 1.Power 1.Ground support systems 1.Ground processing and manifesting 1.Launch Vehicle 1.Cryogenic Systems Additional Info: Project: Space Shuttle Program Approval Info: Approval Date: 2011-09-28 Approval Name: mbell Approval Organization: HQ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSK-M4D722-A2-2008 ABS 7 % GLASS FIBER REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《ABS 7%强化玻璃纤维模压塑料(与FORD WSS-M99P1111-A一起使用) (使用 FORD ESB-M4D483-A1 FOR.pdf FORD WSK-M4D722-A2-2008 ABS 7 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《ABS 7%强化玻璃纤维模压塑料(与FORD WSS-M99P1111-A一起使用) (使用 FORD ESB-M4D483-A1 FOR.pdf
  • FORD WSK-M4D724-A1-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSK-M4D724-A1-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSK-M4D724-A2-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER 10% ACRYLIC REGRIND REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-.pdf FORD WSK-M4D724-A2-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER 10% ACRYLIC REGRIND REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-.pdf
  • FORD WSK-M4D725-A-2012 POLYBUTYLENE TEREPHTHALATE (PBT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  .pdf FORD WSK-M4D725-A-2012 POLYBUTYLENE TEREPHTHALATE (PBT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf
  • FORD WSK-M4D726-A1-2005 POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《聚对苯二甲酸乙二醇酯(PET) 30%玻璃纤维强化模塑料(和FORD WSS-M.pdf FORD WSK-M4D726-A1-2005 POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚对苯二甲酸乙二醇酯(PET) 30%玻璃纤维强化模塑料(和FORD WSS-M.pdf
  • FORD WSK-M4D726-A2-2011 POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《内部30%玻璃纤维增强模塑材料聚乙烯对苯二甲酸酯(PET)  .pdf FORD WSK-M4D726-A2-2011 POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部30%玻璃纤维增强模塑材料聚乙烯对苯二甲酸酯(PET) .pdf
  • FORD WSK-M4D727-A-2008 POLYBUTYLENE TEREPHTHALATE (PBT) 20% GLASS FIBER REINFORCED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《20%强化玻璃纤维模制物料的聚对苯二甲酸丁二醇酯(PBT)(与FORD WSS-M.pdf FORD WSK-M4D727-A-2008 POLYBUTYLENE TEREPHTHALATE (PBT) 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%强化玻璃纤维模制物料的聚对苯二甲酸丁二醇酯(PBT)(与FORD WSS-M.pdf
  • FORD WSK-M4D729-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED MELT FLOW RATE 1 5 - 4 0  TO BE USED WITH FORD WSS-M99P1111-A  《熔体流动速率为1 5-4 0的20%矿物填充的聚丙烯(PP)均聚物  与标准FORD.pdf FORD WSK-M4D729-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED MELT FLOW RATE 1 5 - 4 0 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为1 5-4 0的20%矿物填充的聚丙烯(PP)均聚物 与标准FORD.pdf
  • FORD WSK-M4D729-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED MELT FLOW RATE 12 - 22  TO BE USED WITH FORD WSS-M99P1111-A  《熔体流动速率为12-22的20%矿物填充的聚丙烯(PP)均聚物  与标准FORD WSS.pdf FORD WSK-M4D729-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED MELT FLOW RATE 12 - 22 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为12-22的20%矿物填充的聚丙烯(PP)均聚物 与标准FORD WSS.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1