RTCA DO-307-2007 Aircraft Design and Certification for Portable Electronic Device (PED) Tolerance.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4049-2016 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray《润滑脂抗水喷雾性测定法》.pdf

ASTM D4050-1996(2002) Standard Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems《蓄水系统水力特性测定用排出和注射井的标准试验方.pdf

ASTM D4050-1996(2008) Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems《蓄水系统水力特性测定用排出和注射井的标.pdf

ASTM D4050-2014 Standard Test Method for &40 Field Procedure&41 for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems《蓄水系统水力特性测定用排出和注射井试.pdf

ASTM D4051-1999(2004) Standard Practice for Preparation of Low-Pressure Gas Blends《低压气体混合物的制备》.pdf

ASTM D4051-2010 Standard Practice for Preparation of Low-Pressure Gas Blends《低压气体混合物的制备标准实施规程》.pdf

ASTM D4051-2010(2015) Standard Practice for Preparation of Low-Pressure Gas Blends《制备低压气体混合物的标准实施规程》.pdf

ASTM D4052-1996(2002)e1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter《数字密度计测定液体密度和相对密度的标准试验方法》.pdf

ASTM D4052-2009 Standard Test Method for Density Relative Density and API Gravity of Liquids by Digital Density Meter《数字密度计测定液体密度 相对密度和API度的标准试验方法》.pdf