SAE AMS 3898 8A-1994 Interleaf Carrier Material Composite Tape Broadgoods Kraft Differentially Coated Paper Unperforated 0 0038 inch 0 0004 (0 097 mm 0 010)《0 0038英寸 0 0004 (0 097 .pdf

上传人:tireattitude366 文档编号:1021246 上传时间:2019-03-21 格式:PDF 页数:2 大小:22.77KB
下载 相关 举报
SAE AMS 3898 8A-1994 Interleaf Carrier Material Composite Tape Broadgoods Kraft Differentially Coated Paper Unperforated 0 0038 inch 0 0004 (0 097 mm 0 010)《0 0038英寸 0 0004 (0 097 .pdf_第1页
第1页 / 共2页
SAE AMS 3898 8A-1994 Interleaf Carrier Material Composite Tape Broadgoods Kraft Differentially Coated Paper Unperforated 0 0038 inch 0 0004 (0 097 mm 0 010)《0 0038英寸 0 0004 (0 097 .pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、AEROSPACE MATERIAL SPECIFICATIONAMS3898/8 REV. AIssued 1984-04Revised 1994-02Reaffirmed 2014-08Superseding AMS3898/8Interleaf Carrier Material, Composite Tape/BroadgoodsKraft, Differentially Coated Paper, Unperforated0.0038 inch 0.0004 (0.097 mm 0.010)RATIONALEAMS3898/8A has been reaffirmed to compl

2、y with the SAE five year review policy._SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including

3、 any patent infringement arising therefrom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2014 SAE InternationalAll

4、 rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside U

5、SA and Canada)Tel: +1 724-776-4970 (outside USA)Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS3898/8A1.1SCOPE:Form:This specification covers a kr

6、aft paper, coated on both sides and withdifferent release characteristics on each side (i.e., differentially coated),supplied in the form of rolls of sheeting or reels of unperforated tape ofthe width specified.2. APPLICABLE DOCUMENTS:See AMS 3898.3. TECHNICAL REQUIREMENTS:Basic Specification:The co

7、mplete requirements for procuring the product described herein shallconsist of this document and the latest issue of the basic specification,AMS 3898.3.2 Material:The carrier material shall be a latex-saturated kraft paper with a heat-curedsilicone emulsion coating on each side. The coating on one s

8、ide shallprovide a controlled release from composite prepreg materials while the otherside shall provide an easy release from these same composite prepregmaterials, with no transfer of coating to the composite prepreg surface.3.2.1 Thickness: Shall be 0.0038 inch 0.0004 (0.097 mm 0.010).3.2.2 Width:

9、 Shall be as ordered.(R)1.3.1SAE INTERNATIONAL AMS3898/8A Page 2 of 2 3.3 Properties:Shall be as shown in Table 1.TABLE 1 - PropertiesParagraph Property3.3.1 Tear Strength, minimumMachine DirectionCross Direction3.3.2 Bursting Strength, minimumRequirement Test MethodASTM D 827-711.4 ounces force (389mN)1.6 ounces force (445 mN)30 psi (207 kPa) ASTM D 7744.5.6.7.8.QUALITY ASSURANCE PROVISIONS:See AMS 3898.PREPARATION FOR DELIVERY:See AMS 3898.ACKNOWLEDGMENT:See AMS 3898.REJECTIONS:See AMS 3898.NOTES:See AMS 3898.

展开阅读全文
相关资源
  • SAE AMS 4219F-2010 Aluminum Alloy Castings 7 0Si - 0 55Mg - 0 12Ti - 0 06Be (A357 0 T6) Solution and Precipitation Heat Treated (UNS A13570)《7 0Si 0 55Mg 0 12Ti 0 06Be (A357 0 T6)溶.pdfSAE AMS 4219F-2010 Aluminum Alloy Castings 7 0Si - 0 55Mg - 0 12Ti - 0 06Be (A357 0 T6) Solution and Precipitation Heat Treated (UNS A13570)《7 0Si 0 55Mg 0 12Ti 0 06Be (A357 0 T6)溶.pdf
  • NEN 10118-0 A1-1994 Hearing aids Part 0 Measurement of electroacoustical characteristics (IEC 118-0 1983 A1 1994)《IEC 118-0-1983 A1-1994 助听器 第0部分:电声特性的测量》.pdfNEN 10118-0 A1-1994 Hearing aids Part 0 Measurement of electroacoustical characteristics (IEC 118-0 1983 A1 1994)《IEC 118-0-1983 A1-1994 助听器 第0部分:电声特性的测量》.pdf
  • SAE AMS 4472A-2017 Aluminum Alloy Plate 4 0Cu - 1 0Li - 0 40Mg - 0 35Ag - 0 13Zr (2195-T34) Solution Heat Treated and Stress Relieved (UNS A92195).pdfSAE AMS 4472A-2017 Aluminum Alloy Plate 4 0Cu - 1 0Li - 0 40Mg - 0 35Ag - 0 13Zr (2195-T34) Solution Heat Treated and Stress Relieved (UNS A92195).pdf
  • SAE AMS 4218J-2010 Aluminum Alloy Castings 7 0Si - 0 35Mg (A356 0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated (UNS A13560)《7 0Si 0 35Mg(A356 0-T6P)(原T6P回火)溶解和.pdfSAE AMS 4218J-2010 Aluminum Alloy Castings 7 0Si - 0 35Mg (A356 0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated (UNS A13560)《7 0Si 0 35Mg(A356 0-T6P)(原T6P回火)溶解和.pdf
  • SAE AMS 4244B-2008 Aluminum Alloy Welding Wire 4 6Cu - 0 35Mn - 0 25Mg - 0 22Ti For Welding A206 0 Type Alloys《焊接A206 0型合金用4 6Cu 0 35Mn 0 25Mg 0 22Ti铝合金焊丝》.pdfSAE AMS 4244B-2008 Aluminum Alloy Welding Wire 4 6Cu - 0 35Mn - 0 25Mg - 0 22Ti For Welding A206 0 Type Alloys《焊接A206 0型合金用4 6Cu 0 35Mn 0 25Mg 0 22Ti铝合金焊丝》.pdf
  • SAE AMS 3898 9A-1994 Interleaf Carrier Material Composite Tape Broadgoods Kraft Differentially Coated Paper Unperforated 0 0050 inch 0 0005 (0 127 mm 0 013)《未穿孔0 0050 in 0 0005(0 1.pdfSAE AMS 3898 9A-1994 Interleaf Carrier Material Composite Tape Broadgoods Kraft Differentially Coated Paper Unperforated 0 0050 inch 0 0005 (0 127 mm 0 013)《未穿孔0 0050 in 0 0005(0 1.pdf
  • SAE AMS 4223E-2015 Aluminum Alloy Castings 4 5Cu - 0 70Ag - 0 30Mn - 0 25Mg - 0 25Ti (A201 0-T4) Solution Heat Treated and Naturally Aged (UNS A12010).pdfSAE AMS 4223E-2015 Aluminum Alloy Castings 4 5Cu - 0 70Ag - 0 30Mn - 0 25Mg - 0 25Ti (A201 0-T4) Solution Heat Treated and Naturally Aged (UNS A12010).pdf
  • SAE AMS 4474A-2015 Aluminum Alloy Sheet and Plate 4 0Cu - 1 0Li - 0 40Mg - 0 35Ag - 0 13Zr (2195-T8) Solution Heat Treated Cold Worked and Artificially Aged (UNS A92195).pdfSAE AMS 4474A-2015 Aluminum Alloy Sheet and Plate 4 0Cu - 1 0Li - 0 40Mg - 0 35Ag - 0 13Zr (2195-T8) Solution Heat Treated Cold Worked and Artificially Aged (UNS A92195).pdf
  • SAE AMS 4229G-2015 Aluminum Alloy Castings High Strength 4 5Cu - 0 70Ag - 0 30Mn - 0 25Mg - 0 25Ti (A201 0-T7) Solution Heat Treated and Overaged (UNS A02010).pdfSAE AMS 4229G-2015 Aluminum Alloy Castings High Strength 4 5Cu - 0 70Ag - 0 30Mn - 0 25Mg - 0 25Ti (A201 0-T7) Solution Heat Treated and Overaged (UNS A02010).pdf
  • 猜你喜欢
    相关搜索
    资源标签

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1