1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2017 SAE InternationalAll rights reserved. No part of this publi
3、cation may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (out
4、side USA)Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on thisTechnical Report, please visithttp:/standards.sae.org/AMS4225DAEROSPACEMATERIAL SPECIFICATIONAMS4225 REV. DIssued 1968-11Revised 2007-06Reaffirmed 2017-11Superse
5、ding AMS4225CAluminum Alloy, Heat-Resistant, Castings5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6)Solution Heat Treated and Precipitation Heat Treated(Composition similar to UNS A02030)RATIONALEAMS4225D has been reaffirmed to comply with the SAE Five-Year Review policy.SAE INTERNATIONAL AMS4225D Page 2 of 8_ SAE INTERNATIONAL AMS4225D Page 3 of 8_ SAE INTERNATIONAL AMS4225D Page 4 of 8_ SAE INTERNATIONAL AMS4225D Page 5 of 8_ SAE INTERNATIONAL AMS4225D Page 6 of 8_ SAE INTERNATIONAL AMS4225D Page 7 of 8_ SAE INTERNATIONAL AMS4225D Page 8 of 8_
