1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report isentirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2013 SAE InternationalAll rights reserved. No part of this publication may be
3、 reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax:
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5334HAEROSPACEMATERIALSPECIFICATIONAMS5334 REV. HIssued 1950-10Revised 2007-08Reaffirmed 2013-04Superse
5、ding AMS5334GSteel, Investment Castings0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod)Normalized and Tempered(Composition similar to UNS J13042)RATIONALEAMS5334H has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5334H Page 2 of 9SAE AMS5334H Page 3 of 9SAE AMS5334H Page 4 of 9SAE AMS5334H Page 5 of 9SAE AMS5334H Page 6 of 9SAE AMS5334H Page 7 of 9SAE AMS5334H Page 8 of 9SAE AMS5334H Page 9 of 9
