1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5383E AEROSPACE MATERIAL SPECIFICATION AMS5383 REV. E Issued 1966-09 Revised 2007-05 Reaff
5、irmed 2012-10 Superseding AMS5383D Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated (Composition similar to UNS N07718) RATIONALE AMS5383E has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5383E Page 2 of 11 SAE AMS5383E Page 3 of 11 SAE AMS5383E Page 4 of 11 SAE AMS5383E Page 5 of 11 SAE AMS5383E Page 6 of 11 SAE AMS5383E Page 7 of 11 SAE AMS5383E Page 8 of 11 SAE AMS5383E Page 9 of 11 SAE AMS5383E Page 10 of 11 SAE AMS5383E Page 11 of 11
