1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5557J AEROSPACE MATERIAL SPECIFICATION AMS5557 REV. J Issued 1955-08 Revised 2002-08 Reaff
5、irmed 2012-10 Superseding AMS5557H Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated (Composition similar to UNS S32100) RATIONALE AMS5557J has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5557J Page 2 of 9 SAE AMS5557J Page 3 of 9 SAE AMS5557J Page 4 of 9 SAE AMS5557J Page 5 of 9 SAE AMS5557J Page 6 of 9 SAE AMS5557J Page 7 of 9 SAE AMS5557J Page 8 of 9 SAE AMS5557J Page 9 of 9
