1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2016 SAE InternationalAll rights reserved. No part of this publi
3、cation may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (out
4、side USA)Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5585HAEROSPACEMATERIAL SPECIFICATIONAMS5585 REV. HIssued 1950-10Reaffirmed 2006-04Revised
5、2016-02Superseding AMS5585GAlloy, Corrosion and Heat Resistant, Welded Tubing32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15NSolution Heat Treated(Composition similar to UNS R30155)RATIONALEAMS5585H revises Reports (4.4), and is a Five Year Review and update of this specification.1. SCOPE
6、1.1 FormThis specification covers a corrosion and heat resistant alloy in the form of welded and drawn tubing.1.2 ApplicationThis tubing has been used typically for parts requiring high strength up to 1500 F (816 C) and oxidation resistance up to 1800 F (982 C), but usage is not limited to such appl
7、ications.2. APPLICABLE DOCUMENTSThe issue of the following documents in effect on the date of the purchase order forms a part of this specification to the extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is specified. When the ref
8、erenced document has been cancelled and no superseding document has been specified, the last published issue of that document shall apply.2.1 SAE PublicationsAvailable from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or +1 724-776-4
9、970 (outside USA), www.sae.org.AMS2243 Tolerances, Corrosion and Heat-Resistant Steel TubingAMS2248 Chemical Check Analysis Limits, Corrosion and Heat-Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron AlloysAMS2371 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steels and Alloys, Wrought Products and Forging Stock
