1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may b
3、e reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5649GAEROSPACEMATERIALSPECIFICATIONAMS5649 REV. GIssued 1951-12Revised 2002-12Reaffirmed 2012-10Supers
5、eding AMS5649FSteel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings18Cr - 13Ni - 2.1MoFree MachiningSolution Heat Treated(Composition similar to UNS J92200)RATIONALEAMS5649G has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5649G Page 2 of 6SAE AMS5649G Page 3 of 6SAE AMS5649G Page 4 of 6SAE AMS5649G Page 5 of 6SAE AMS5649G Page 6 of 6
