1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report isentirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may be
3、 reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax:
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5714DAEROSPACEMATERIALSPECIFICATIONAMS5714 REV. DIssued 1969-01Revised 2006-05Reaffirmed 2012-04Superse
5、ding AMS5714CAlloy Bars, Forgings, and Rings, Corrosion and Heat-Resistant73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0FePrecipitation-Hardenable(Composition similar to UNS N07722)RATIONALEAMS5714D has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5714D Page 2 of 6SAE AMS5714D Page 3 of 6SAE AMS5714D Page 4 of 6SAE AMS5714D Page 5 of 6SAE AMS5714D Page 6 of 6
