1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5738D AEROSPACE MATERIAL SPECIFICATION AMS5738 REV. D Issued 1956-02 Revised 2002-11 Reaff
5、irmed 2013-04 Superseding AMS5738C Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked (Composition similar to UNS S30323) RATIONALE AMS5738D has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5738D Page 2 of 6 SAE AMS5738D Page 3 of 6 SAE AMS5738D Page 4 of 6 SAE AMS5738D Page 5 of 6 SAE AMS5738D Page 6 of 6
