1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5744E AEROSPACE MATERIAL SPECIFICATION AMS5744 REV. E Issued 1965-02 Revised 2003-01 Reaff
5、irmed 2013-04 Superseding AMS5744D Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength (Composition similar to UNS S35500) RATIONALE AMS5744E has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5744E Page 2 of 6 SAE AMS5744E Page 3 of 6 SAE AMS5744E Page 4 of 6 SAE AMS5744E Page 5 of 6 SAE AMS5744E Page 6 of 6
