1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5868BAEROSPACEMATERIALSPECIFICATIONAMS5868 REV. B Issued 1993-01 Revised 2006-05
5、Reaffirmed 2012-02 Superseding AMS5868A Steel, Corrosion-Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper (Composition similar to UNS S30400)RATIONALEAMS5868B has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5868B Page 2 of 5 SAE AMS5868B Page 3 of 5 SAE AMS5868B Page 4 of 5 SAE AMS5868B Page 5 of 5
