1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report isentirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may be
3、 reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax:
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5907BAEROSPACEMATERIALSPECIFICATIONAMS5907 REV. BIssued 1992-01Revised 2006-09Reaffirmed 2012-04Superse
5、ding AMS5907ASteel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate17Cr - 12Ni - 2.5Mo (SAE 30316)Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength(Composition similar to UNS S31600)RATIONALEAMS5907B has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5907B Page 2 of 5SAE AMS5907B Page 3 of 5SAE AMS5907B Page 4 of 5SAE AMS5907B Page 5 of 5
