1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may b
3、e reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5931AAEROSPACEMATERIALSPECIFICATIONAMS5931 REV. AIssued 1995-05Revised 2005-08Reaffirmed 2012-04Supers
5、eding AMS5931Steel, Bars, Wire, Forgings, Extrusions, Tubing, and RingsWear, Galling, and Corrosion-Resistant5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14NSolution Heat Treated(Composition similar to UNS S20161)RATIONALEAMS5931A has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5931A Page 2 of 8SAE AMS5931A Page 3 of 8SAE AMS5931A Page 4 of 8SAE AMS5931A Page 5 of 8SAE AMS5931A Page 6 of 8SAE AMS5931A Page 7 of 8SAE AMS5931A Page 8 of 8
