1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5936C AEROSPACE MATERIAL SPECIFICATION AMS5936 REV. C Issued 2001-04 Revised 2007-06 Reaff
5、irmed 2012-10 Superseding AMS5936B Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 1.7Ti - 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable (Composition similar to UNS S46500) RATIONALE This document has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5936C Page 2 of 8 SAE AMS5936C Page 3 of 8 SAE AMS5936C Page 4 of 8 SAE AMS5936C Page 5 of 8 SAE AMS5936C Page 6 of 8 SAE AMS5936C Page 7 of 8 SAE AMS5936C Page 8 of 8 PREPARED BY AMS COMMITTEE “F”
