1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5962A AEROSPACE MATERIAL SPECIFICATION AMS5962 REV. A Issued 1997-07 Revised 2003-01 Reaff
5、irmed 2012-10 Superseding AMS5962 Nickel Alloy, Corrosion and Heat-Resistant, Round Bars and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 F (968 C) Solution Treated and Work Strengthened Precipitation Hardenable (Composition similar to UNS N07718) RATIONALE This document has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5962A Page 2 of 7 SAE AMS5962A Page 3 of 7 SAE AMS5962A Page 4 of 7 SAE AMS5962A Page 5 of 7 SAE AMS5962A Page 6 of 7 SAE AMS5962A Page 7 of 7 PREPARED BY AMS COMMITTEE “F”
